Just finished printing this, looks amazing, but the drip tray doesn’t snap into place. It’s quite loose actually. What might be wrong? Didn’t scale anything
I believe you must set the bridge flow speed up to 1.6 from the original 1 value.
I think this causes those overhangs on the snap in place ears to be more tight.
Im like 100% sure I have seen this information in one of his other planters where he used this solution, mentioned it in the print settings.. hope this helps
Hello, I am printing with a 0.6mm nozzle, and although the parts fit together, once you screw the thread in completely, it becomes impossible to unscrew it again.
Could you possibly create the thread fit with a slightly larger tolerance?
Or alternatively, could you share the 3D model so we can adjust the tolerance based on our printers?
Discussions — Bubble Lattice Planter
No LED light?
Just finished printing this, looks amazing, but the drip tray doesn’t snap into place. It’s quite loose actually. What might be wrong? Didn’t scale anything
I believe you must set the bridge flow speed up to 1.6 from the original 1 value. I think this causes those overhangs on the snap in place ears to be more tight. Im like 100% sure I have seen this information in one of his other planters where he used this solution, mentioned it in the print settings.. hope this helps
Any chance we could get a planter mount version for slat walls/ office cubicle slats?
When I select STL as my download type the files are never downloaded.
Hello, I am printing with a 0.6mm nozzle, and although the parts fit together, once you screw the thread in completely, it becomes impossible to unscrew it again.
Could you possibly create the thread fit with a slightly larger tolerance? Or alternatively, could you share the 3D model so we can adjust the tolerance based on our printers?
When I select STL file to download nothing happens.
I keep getting errors when I try to load this into Cura that there are pieces missing/corrupted. Any ideas? Do you use a different slicer?
Is there a print file without the wall mount?
From the description: "I've also included tabletop versions that don't have the wall mount."