Use “Thread Feet” and Rods to make your Multiboard stand by itself, it’s an alternative to the Free-Standing Foot.
The advantage of the Thread Foot is that you can extend the length of the rods and make your free-standing Multiboard taller.
To set it up, screw a Big Thread Rod into your tiles, then screw a Thread Foot on both ends of the rod, and finally secure it into place using Big Thread Nuts.
Learn more about this part at https://multiboard.io/knowledge-hub
Printing Guidelines:
The printing orientation is as provided in the file. The print has been designed to be “3 wall perimeters” in wall thickness. Printed at a layout height of 0.2 mm. It doesn't need printing supports. Use the default 15% infill. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.
—
This object is part of Multiboard, a FREE "all in one" organization system with 700+ parts, that combines pegboard holes, honeycomb snaps, Gridfinity like bins, threads, brakes, and much more.
Explore and build the coolest, most adaptable workshop at https://multiboard.io