All Kekreations designs are under Copyright and you may NOT sell any digital files or prints of my designs. 

If you are interested in obtaining the rights to sell commercially, you can join the Thangs Membership!

Check out my socials to keep up with other designs in the works!
[Instagram](https://www.instagram.com/kekreationsart/)
[Tiktok](https://www.tiktok.com/@kekreationsart)
[Facebook](https://www.facebook.com/kekreationsart)
[Youtube](https://www.youtube.com/channel/UCz5aaSy-DlRZ7P6W_7WUVxg)

Feel free to tag me or DM me on any socials if you post photos, I would love to see them! <3


Modular Flower Bracelet

modular flower bracelet colored.3mf

Fidget ring.
Print INNER ring with a pause at layer 48, and put the OUTTER ring over the top, and resume.
Run the fine edge of a print removal tool around the top seam to free up.
Silk filament makes the action nice and smooth.
Ensure your filament settings are really dialled in, example can be seen in the image with the 2 Gold silk rings(Amazon Basic Gold Silk PLA, Black is Elegoo Basic PLA).
The Gold Silk was printed on a Creality Ender 3 V3 SE, Black was printed on a Qidi Plus 4.

Fidget Ring

Fidget_Ring_Inner.stl

This striking jewelry piece is designed for printing with LCD printers. It's hollow and already has a drain hole. I made 5 US sizes(6, 7, 8, 9, 10.) The model is really easy to print. Just place it as pictured, generate auto supports and that's all. You can find the earrings here to make a set: https://thangs.com/designer/SONA/3d-model/Futuristic%20Star%20photoshoot%20earrings-1124801
Happy printing!

Chonky Star Ring

S.stl

This model is designed for resin printers and is easy to print. Simply place the circle vertically and apply the necessary supports at the base, adding a few more along the sides for stability. The original model has a diameter of 5 cm, but you can scale it up or down as needed. I tried 5 cm, 4 cm and 3cm, and they all look cute. I used a special resin-based silver paint for the inside, which creates a contrasting background to the beautifully organic, textured lace frame.

Happy printing!

Artistic Earring With Organic Textured Lace

lacy earring.stl

This delicate mesh voronoi heart is made for printing with resin printers. It's easy to print. Just place it upside down, generate auto supports, remove all the supports from the inside. This heart can be used in so many decorative projects: earrings, ornaments, etc... I used them as a component for Valentine's day earrings. They can be printed with regular or flexible resins. The prints with regular resin do seem fragile, but they are not. They are flexible. When pressing hardly they bend, but you must try really hard to break them.

Surprise me! Show me your own projects!)

Happy printing!

Voronoi heart. Delicate, flexible mesh.

heart tiny mesh.stl

I designed this model for creating functional lamp shade earrings. But of course they can be used as decoration too. These models must be printed with resin printers. They are too delicate for FDM printing. If you are a resin artist, you can play with colorful resins to create some unique pieces with stained glass effect. Painting the bulb part with colored UV resin you get these colorful lights. The top and lamp shade parts are made to perfectly fit the (1cm diameter) body and bail of the led lamps you can easily find online. The lamp shade part needs to be glued with a special strong glue or UV resin to the led base. The top does not need any glue.
If you have more questions, please ask:)

Happy printing!

Lamp shade earring(decoration)

ready S lamp.stl

I designed this fashion piece for printing with resin printers. 
The inner diameter of the model is 6.6cm, and it fits small to medium wrists. You can make some adjustments due to your preferences.

Seafoam bangle

seafoam bangle.stl

The model is really easy to print with a few supports, just as pictured. To make a pair of earrings, you need to duplicate and mirror the model. On the back side I made a hole where the stud must be glued with UV resin glue.
Happy Printing!

Lightning Bolt Earring

bolt2 (2).stl

I called this Sonaflower, because I couldn't decide any other name, as it is completely stylized and abstract. I created this flower for ear studs. Of course, it can be scaled and printed for other projects. If you use it for studs, start from 4cm. When scaled smaller they may break. To slice, simply place them vertically and apply auto supports just like in the picture.

''Sonaflower'' for ear studs

sunflower.stl

This hollowed model makes a pair of cool trendy earrings. It's really easy to print. You just place the model as pictured, generate auto supports and that's all. To make a pair, copy the model and Y mirror it for symmetry. The original size is around 5cm. I scaled it down to about 3.5 to print the tiny ones. 
Happy printing!

Futuristic Star photoshoot earrings

star (2).stl

I designed this delicate voronoi circle to create some lacy elegant earrings. This model is designed for printing with resin printers. It's an easy print. Just place the circle vertically and apply all the necessary supports on the beginning and a few more for the sides for stability.

Happy printing!

Voronoi Circle

voroni circle (7).stl

This fashion accessory is designed for printing with resin printers. The STL model size is suitible for small to medium sized wrists. Scale up if you need a larger one.
If you use a good strong resin, you don't even need too many supports to have a perfect print.

Hex raised edge cuff bangle

cuff subdivide.stl

I designed this flower for creating some cute tiny studs. The model with stud is 2cm in diameter. I don't recommend to scale it. But the other model, which has no stud can be scaled to printed for larger earrings or using in any other project. 
To print it, place the model vertically and auto generate the supports. 

Rosehip Flower Earring. With and without stud.

rosehip tiny stud.stl

This model is created for printing with LCD printers. To print a pair of studs, duplicate and mirror the model, place it vertically on the buildplate and apply all the necessary supports. The original size is about 5cm in diameter. Scale it up or down for different sizes. The smallest size I printed successfully was 1 inch. But in this case, scale up the thiskness so it will turn out with beautiful detail.

Happy printing!

Futuristic Flower Stud Earring

flower futuristic.stl

This gorgeous model is created for printing with resin printers. Scale it down to print as earrings and pendants, or scale it up to print as decor. Scale up only Y axis to make it longer...etc.... Just make sure you apply all necesary supports to achieve good printing results. 
Please, feel free to contact me any time  with any question you may have about the model or slicing or even about how to glue the bail for earrings.

Voronoi heart

heart voronoi.stl

This Tiffany chandelier inspired earring base is designed for printing with resin printers. It makes a delicate but robust wireframe to use in resin projects as a base. It's an easy print and does not need many supports. Just place it vertically on the build plate and generate the auto supports.

Happy printing!

Chandelier earring base

Ingenious Luulia (2).stl

This piece is created for printing with resin printers. I used the file for creating lightweight earrings. And, of course, I'll scale them up to print some cool decorations. The walls are extremely delicate, so, please, print it with high quality strong resin.  You'll need to print this piece upside down. That way it will not need too much supports. Just auto generate the supports and delete the ones inside the pod(no supports are needed inside the pod) so it will be clean and easy to remove. Chitu box adds only one support on the bail. Add 1-2 more for security. As you see in the picture, you need supports only for the base.
If you have more questions, I'm here to help.

Voronoi pomegranate earring or decor

pomegranate thangs.stl

This model is made for printing with resin printers. You'll download two sizes: 5cm and 4cm. The bail size is the same for both sizes. This model is really easy to print. We place it vertically, and apply a few supports on the beginning and a few more as you see in the picture.

Happy Printing!

Spiral Earrings

5cm.stl

This earring model is created for printing with resin printers.
It's a delicate but sturdy design with lots of tiny details.
Just make sure to apply all the necessary supports in order to have good printing results.

GOTHIC WINDOW INSPIRED FLOWER EARRING

goth flower.stl

I made these two delicate lacy models as lightweight earrings. They are 4cm half torus  shapes designed to print with resin printers.
The model is really easy to print if you apply all the right supports.
To slice it on Chitu box, place the model vertically and apply all the necessary supports manually. The most important supports are the ones placed on the beginning points. There are no supports needed for the inside.

Mesh earrings

earring bublik.stl

Jewelry

I run 2 FB pages. Waddle Works and Planetary Crystals. 

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

Jennifer Waddle

Achievements

Voyager

Novice Maker

Seedling