Bartender shotglass, also known as a "Double Jiggler". The tall side is 2 oz and the short side is 1 oz.
-Print with the tall side facing down. -Designed to print without supports but you can use them if your printer does not have good bridge settings. -20 walls or 100% infill
To properly clean this shotglass, scrub with soap and water followed by a sanitizing soak in a bleach/water solution and finally allowing to air dry, this is a common and widly used method of sanitization. If you decide to print this, you adknowledge the proposed risks assiociated with consuming drinks that came into contact with a 3D printed part. For more information regarding the proper sanitization steps for 3D printed parts, the following article is an excellent paper published on the subject: https://www.researchgate.net/publication/373174194_Sanitation_Effectiveness_of_3D-printed_Parts_for_Food_and_Medical_Applications