4 Color HueForge model. Han Solo Carbonite filament painting made using Sunlu PLA+ colours.
Print at 0.08mm layer heights, 0.16mm first layer. 100% infill (Rectilinear)
Filaments Used: Sunlu PLA+ Black Transmission Distance: 0.6 Sunlu PLA+ Grey Transmission Distance: 2 Sunlu PLA+ Silver Transmission Distance: 2 Sunlu PLA+ White Transmission Distance: 6
Swap Instructions: Black until layer #6 at 0.56mms Grey until layer #9 at 0.8mms Silver until layer #11 at 0.96mms White for the rest
This is a filament blending model, avoid special filaments and stick with the plain ones for the best results. SUNLU filaments tend to be more transmissive and are a good choice.
Use the exact numbers in your slicer to match up properly.
two different size models are supplied and designed to print with 0.4 nozzle,
If re-scaling model make sure not to alter the Z height of the model
ALL Ian Smalley's designs are protected by Copyright Law. Downloading does not give you permission to use the files or physical prints for financial gain. If you want a commercial license to Legally sell prints from my designs, you will need a SELLER subscription.