Swamp Thing Can Cup.stl

Swamp Thing Can Cup for 12oz cans!

I originally designed this to print without supports, but after doing the first test print I found that it does need supports on the lower portion of the handle at the back of the lowest fin.

Also, while the ears will print without supports, I recommend using them for the sake of your sanity...That overhang gets a bit nerve-racking!!

I printed the test piece with the following settings and it came out really nice, but I plan on doing another test with a .4 nozzle to see if it makes a noticeable difference in quality.

.6mm nozzle .2 layer height 2 walls 15% infill 40mm/sec outer walls 50mm/sec inner walls

My Links: https://linktr.ee/Glytch3d