tracking pixel
GOODesign

Horror house - Inspired by 'Evil dead'

by
GOODesign
Follow
Follow
Remix Model
GOODesign
GOODesign
|
Image 1 of 4
Horror house - Inspired by 'Evil dead' 3d model
GOODesign
GOODesign
|
Image 1 of 4
Horror house - Inspired by 'Evil dead' 3d model
2D
3D
Makes
Horror house - Inspired by 'Evil dead' 3d model
Horror house - Inspired by 'Evil dead' 3d model
Horror house - Inspired by 'Evil dead' 3d model
Horror house - Inspired by 'Evil dead' 3d model

Halloween needs a spooky vibe. The haunted house is representative of this atmosphere. This time I designed a haunted house that captures that eerie atmosphere very well.

One of the most representative films of the haunted house is 'The Evil Dead'. This design was inspired by the house, the main setting in the movie 'The Evil Dead'. When I first saw this movie, I was so scared that I couldn't sleep, but now I see it as an action drama.

This haunted house can be used as a light by putting an LED D-light candle inside, and when you put the LED light in a dark room and turn it on, it is like watching a scene from a horror movie.

The process of printing and finishing is as follows.

First, turn the wall with the door to stand up, and align it with the protrusion of the wall next to it. After aligning the roof, place it on the protrusion on the wall and insert it. Glue the 4 pillars to the hole in the underside of the roof and the hole in the deck in front of the door with glue. Connect the floor surface to the lower floor of the house. The bottom surface can be easily removed and attached, so you just have to remove the bottom surface, put the lights on, and then close the floor again.

Happy halloween!

Largest part in printing, size = X126mm, Y 110mm, Z 76mm, After full assembly size= X 120mm, Y 127mm, Z 88mm

Total Weight = 141g Design by GOODesign


3 Likes0 DownloadsOctober 30, 2024


3 Likes0 DownloadsOctober 30, 2024