Can you make it another row taller by doubling up the top row so it can feed in to both rows from the top and feed into bottom row from the back from both the top rows?
I have a Bambu P1S (250x250 print bed) and would be eager to help you test additional sizes of this dispenser. I would also be extremely interested in a 12 can (or more) version - a modular variant like the Aeris you mentioned would be even better. I buy boxes of 48 cans at a time, so need lots of dispenser capability. :D
Printed this before I realized the size of my cans. Would love a version for the larger 5oz cans. For now I can fit two in the bottom section of this model, but hey it works great for those 2 cans.
While standard kitchen cabinet uppers are typically a minimum depth of 12" this is usually an exterior dimension measurement that includes the face frame. For my use case, a maximum interior depth that sits inside the face frame is just over 10.5". There aren't many cat food dispenser models available out there in the wide world and was super bummed this one would not work for my use cases.
Does anyone sell the already made items? I don't have a printer or access to one, but would love to have these made for 3oz and 5.1oz cans for my cats.
Discussions — Cat Food Can Dispenser - 8 Can Capacity
Can you make it another row taller by doubling up the top row so it can feed in to both rows from the top and feed into bottom row from the back from both the top rows?
This is brilliant. I have a Bambulabs X1C. I am defiantly down to help out in a ny way I can.
I just published the 12 can version! Let me know what you think.
I have a Bambu P1S (250x250 print bed) and would be eager to help you test additional sizes of this dispenser. I would also be extremely interested in a 12 can (or more) version - a modular variant like the Aeris you mentioned would be even better. I buy boxes of 48 cans at a time, so need lots of dispenser capability. :D
I have a 12 can version ready for testing! I'll add you as a collaborator to the model.
Bambu X1 Carbon user here also interested in a larger size and willing to do testing. let me know!
Thank you! I invited you to the model. Let me know how it goes.
How did it go? Very interested in a 12 can version. Also using a P1S. Happy to test as well.
Initial testing went well and I'll be publishing the model tonight.
Any plans to design one for standard sized human canned food?
I have dog food and human food versions in the works! It'll probably be a couple of weeks before I get those posted.
Printed this before I realized the size of my cans. Would love a version for the larger 5oz cans. For now I can fit two in the bottom section of this model, but hey it works great for those 2 cans.
Most Amazing!
Hey!
I have been looking far and wide for a version similar to this but that holds 7oz (200g) cans from MAC's.
How hard would it be to adapt this to hold cans that have a diameter of 79mm and a height of 61.5mm?
Dude this design absolutely rules! Thanks so much. Printing my third currently, you've helped organize my shelves!
While standard kitchen cabinet uppers are typically a minimum depth of 12" this is usually an exterior dimension measurement that includes the face frame. For my use case, a maximum interior depth that sits inside the face frame is just over 10.5". There aren't many cat food dispenser models available out there in the wide world and was super bummed this one would not work for my use cases.
Does anyone sell the already made items? I don't have a printer or access to one, but would love to have these made for 3oz and 5.1oz cans for my cats.