What a perfect addition to my plant wall trellis! The rectangular pot is perfect for succulents since it’s not too deep and the circular pot was perfect for the spider plant baby I had to repot! I will be adding more trellis tiles around my house I just have to get to hanging them up!
This is an awesome model! I used it to upgrade my propagation station. I used the Grow Light adapter, and added a negative cylinder to make a hole to hold my propagation tubes. I love this so much I will keep expanding my trellis!
The grow light and adapters for the pots made this trellis so much more functional 🥳
This is on a wall of our camper where a slide comes in so taking things off the trellis is a must on travel days which these new additions made possible without new zip ties constantly being used
Perfect addition for a little girl's bedroom. She's not quite ready for a real plant, so a few Lego roses will do. Already printing more accessories! Such a fun print.
What a fun project this was!! Trellis base kit+ botanical bundle + some prints from Lofted Goods! Had to modify the trellis pot mount a little bit to accommodate a smaller pot size from LG but everything from this bundle printed beautifully! Light mounts fit perfectly, and all trellis mounts slide on/off with ease. Perfect little setup for my propogation cuttings and succulents!
Hi there! You won 1st place in our Botanical Trellis Competition! Make sure to send me a message via the contact button or message me on discord. Congratulations!
Used some heavy-duty double-sided tape to secure. I really love being able to put something on these windows like this! The window can still open and isn't a window we can see out because it is a basement level. So really adds a nice way for me to have low light plants or starters. In this case my bonsai sprouts! I used the cup holder for the Kokedama which makes me just want to do a few more and cover the other window which just a bunch of those. Thats if I can get them to grow of course :-) Love the versatility and look forward to all the things my brain is already creating with it.
Hi there! You won 2nd place in our Botanical Trellis Competition! Make sure to send me a message via the contact button or message me on discord. Congratulations!
Hi there! You won 3rd place in our Botanical Trellis Competition! Make sure to send me a message via the contact button or message me on discord. Congratulations!
Super cozy addition to my setup, easy to mount and looks awesome. I scaled it to 85% so the trellis could fit into my ender 3 v2. Planning on putting some lighting and expanding!
I'm OBSESSED! however the round pot was VERY tight to slide into the adapter.. like I had to use a hammer... used the Easy Print file and didn't change anything
Hi, There could be a few resons for this, One of the most likely causes is elephant foot on the first layer. To fix this, you can lower the buildplate tempeture or change the elephant foot compensation in the slicer.
There could also be seam bulges, which can be fixed by turning on scarf seams, or over-extrusion that can cause this issue too
Ok thank you!! I'll take a look. I'm already using the Bambu SuperTack Cool Plate so I'm assuming the plate temp is already pretty low.
Obviously you can't be certain, but would you guess it's the pot or the adapter that has the issue?
In my expierience, the Bambu Supertack cool plate does seem to cause more elephant foot than the regular textured PEI plate, likely because the filament gets heated a bit more on the first layer and smooshed a bit more, so you will want to look closely at that and likely up the compensation in the slicer. For that reason I would guess it is the inner pot that you'll want to look at because it is most likely the cause of your issues
Discussions — Botanical Bundle for Trellis
Look at those 😍😍😍😍
Thank you!
Those colors 😍😍😍
Amazing 🤩
Hello! What are those self watering planters you used? I love them!
Hi there! You won 1st place in our Botanical Trellis Competition! Make sure to send me a message via the contact button or message me on discord. Congratulations!
Love the window mount look 😍😍😍😍
Hi there! You won 2nd place in our Botanical Trellis Competition! Make sure to send me a message via the contact button or message me on discord. Congratulations!
Hi there! You won 3rd place in our Botanical Trellis Competition! Make sure to send me a message via the contact button or message me on discord. Congratulations!
OOOHH Love the color of the Trellis!
May I request a way to hang a power strip?
Hi! I’ll add it to the idea list!
I'm OBSESSED! however the round pot was VERY tight to slide into the adapter.. like I had to use a hammer... used the Easy Print file and didn't change anything
Hi, There could be a few resons for this, One of the most likely causes is elephant foot on the first layer. To fix this, you can lower the buildplate tempeture or change the elephant foot compensation in the slicer.
There could also be seam bulges, which can be fixed by turning on scarf seams, or over-extrusion that can cause this issue too
Ok thank you!! I'll take a look. I'm already using the Bambu SuperTack Cool Plate so I'm assuming the plate temp is already pretty low. Obviously you can't be certain, but would you guess it's the pot or the adapter that has the issue?
In my expierience, the Bambu Supertack cool plate does seem to cause more elephant foot than the regular textured PEI plate, likely because the filament gets heated a bit more on the first layer and smooshed a bit more, so you will want to look closely at that and likely up the compensation in the slicer. For that reason I would guess it is the inner pot that you'll want to look at because it is most likely the cause of your issues
10-4! Thanks for the info! will do some testing!
You could make it to print it on the bambu lab A1 mini. please
There's no plans currently to make a smaller version. The pattern just doesn't work at that small of a size unfortunately