Can you turn on the Remix setting? I've split the organizer in half so that it can be printed on smaller build volume printers, like the Ender 3, and every Prusa printer. Seems there is some interest in the comments for a split version like this: https://imgur.com/a/DBa9FOh
I have just finished printing the organiser with accents and no mag safe but the phone stand is missing the front of the lip that holds the phone. This means that I can’t stand my phone on it. The organiser plain and accents with MagSafe have this bit.
Is there any chance you could upload an additional part to fill in this gap please?
Hi, I love this design and was looking to make a few tweaks to suit my needs. Would it be possible to get all the dimensions from you? As when I look at the STL file in Fusion the dimensions are way off and I have no idea what an ideal size is.
FYI: It is a shame the location of the MagSafe isn't adjustable in the model. When my iPhone is in its case, this puts the MagSafe a tad too low (the iPhone's charging coil is now higher). This makes aligning the phone difficult. Either moving the MagSafe higher to accommodate all phones would be nice, or remove the bottom lip that phones rest on would be a nice improvement to the model. One can always add padding to the model vs having to remove plastic which is much harder. Plus you really don't need a bottom lip to rest your phone on, since MagSafe grips the and holds the phone in the first place.
I have the iPhone 13 with a Spigen Ultra Hybrid MagSafe case. I took your original model into TinkerCAD and lowered the lip by a few millimeters (aka removed material). I hope this is enough to make a difference. I have yet to print and test out my modification due to the 39 hours of print time. I will update you as soon as I do.
However, so far I am loving the organizer! Your designs are awesome! The MagSafe and drawer tolerance was great too.
With the drawers underneath it, I don't see a way to make the MagSafe adjustable. From the video/instagram post I changed the phone stand, so that the phone would lay flat on it. Before the camera bump was catching the top of the stand. I decreased the overall height of the stand and increased the size of the bottom lip to shift the phone upwards. I can remove the 4mm from the bottom lip that I added or just remove the lip all together for the mag safe models. I am leaning towards keeping some amount of lip just to keep your phone from falling into the flash drives and SD cards. Would decreasing the lip by 4mm be enough to make your phone align? Also what phone do you have?
Edit: Thank you for your thoughtful comment. I am always looking to improve my models.
if i scaled it the usbs and calipers wouldn't fit.... I already have it printing in 2 pieces I was stating that some people don't know how to do that properly.
to print this I had to split the print in fusion at the phone holder and I'm going to lose one of the sd slots but it will be well worth it for this. I would love to see you post one that accommodates a print bed of 210*210 for those that don't do their own designs and mods.
I'm curious to know if you were successful in splitting the model to fit 210*210? I gave it a shot with my very limited tinkercad skills and were unsuccessful..
Discussions — Engineer's Desk Organizer
This is the most genius ways for a combined USB/USB-C/Micro SD/ SD holder that I have seen. Thumbs up this brilliant idea.
Can you turn on the Remix setting? I've split the organizer in half so that it can be printed on smaller build volume printers, like the Ender 3, and every Prusa printer. Seems there is some interest in the comments for a split version like this: https://imgur.com/a/DBa9FOh
Would also love a split version. This is by far the best organizer I've found, it just doesn't quite fit on my print bed. :-(
how can I remix this to make it fit on my printer
I have just finished printing the organiser with accents and no mag safe but the phone stand is missing the front of the lip that holds the phone. This means that I can’t stand my phone on it. The organiser plain and accents with MagSafe have this bit. Is there any chance you could upload an additional part to fill in this gap please?
Is support inside of the drawer slots needed?
While the question is a bit older I wonder if anyone can answer it as this is quite a long print and I rather not have it fail :-)
Any chance you can split the model horizontally? My mega s has a max hight of 205mm This looks like an great organizer. Awesome video.
Hi, I love this design and was looking to make a few tweaks to suit my needs. Would it be possible to get all the dimensions from you? As when I look at the STL file in Fusion the dimensions are way off and I have no idea what an ideal size is.
Hello, I have reviewed 3 amazing Filaments for AzureFilm and Included this model... it turned amazing ...https://youtu.be/zYLYQDJP6hs check it out
i like the design it just doesn't fit on my print bed and will take so much time to print and quite a bit of filament
Will the design be ok for an Iphone 13 pro with a regular cover on?
Yes I lowered the lip as Mcotis suggested
FYI: It is a shame the location of the MagSafe isn't adjustable in the model. When my iPhone is in its case, this puts the MagSafe a tad too low (the iPhone's charging coil is now higher). This makes aligning the phone difficult. Either moving the MagSafe higher to accommodate all phones would be nice, or remove the bottom lip that phones rest on would be a nice improvement to the model. One can always add padding to the model vs having to remove plastic which is much harder. Plus you really don't need a bottom lip to rest your phone on, since MagSafe grips the and holds the phone in the first place.
Thank you for providing this update! I have removed 4mm off of the lip on the mag safe models
Update: The modification I made to model works great now. My phone charges while inside my case (or no case) just fine now.
I have the iPhone 13 with a Spigen Ultra Hybrid MagSafe case. I took your original model into TinkerCAD and lowered the lip by a few millimeters (aka removed material). I hope this is enough to make a difference. I have yet to print and test out my modification due to the 39 hours of print time. I will update you as soon as I do. However, so far I am loving the organizer! Your designs are awesome! The MagSafe and drawer tolerance was great too.
With the drawers underneath it, I don't see a way to make the MagSafe adjustable. From the video/instagram post I changed the phone stand, so that the phone would lay flat on it. Before the camera bump was catching the top of the stand. I decreased the overall height of the stand and increased the size of the bottom lip to shift the phone upwards. I can remove the 4mm from the bottom lip that I added or just remove the lip all together for the mag safe models. I am leaning towards keeping some amount of lip just to keep your phone from falling into the flash drives and SD cards. Would decreasing the lip by 4mm be enough to make your phone align? Also what phone do you have?
Edit: Thank you for your thoughtful comment. I am always looking to improve my models.
Hey squeegee, try scaling it in your slicer.
if i scaled it the usbs and calipers wouldn't fit.... I already have it printing in 2 pieces I was stating that some people don't know how to do that properly.
to print this I had to split the print in fusion at the phone holder and I'm going to lose one of the sd slots but it will be well worth it for this. I would love to see you post one that accommodates a print bed of 210*210 for those that don't do their own designs and mods.
I'm curious to know if you were successful in splitting the model to fit 210*210? I gave it a shot with my very limited tinkercad skills and were unsuccessful..