Looking for suggestions on sizing to fit the hatching dino's into the eggs. I printed at the default sizes and the dino's are a bit too big for the egg to close.
Would love to know what colors/ brands of filament were used on these designs CinderWings. I just love all of them. I'm a beginner :) So. Just starting to build my filament supply.
Hi ive downloaded this file and its not opening is there something ive done wrong please, as all the other files I download open perfectly and print perfectly
Can you please elaborate, what do you mean by "not open"? These are just regular STL files so they shouldn't be giving you any trouble! Did you unzip them from the ZIP?
Hey there! I do recommend checking your flow and what not if the eggs are not fitting together and locking correctly! As for the inside of the egg, check your overhangs and cooling!
Sorry to bother you but I did not find a 3mf file in the packages. I printed the keychain version it at 90% with 0.4mm nozzle, 0.2mm layer height and 3 walls, with variable layer height. It only uses smaller layers on the top. Overally it looks good, but the egg opens too easily, could you make the lock mechanism a bit bigger? Or do you have an idea how to fix it?
Discussions — Hatchling Egg Pack
Looking for suggestions on sizing to fit the hatching dino's into the eggs. I printed at the default sizes and the dino's are a bit too big for the egg to close.
That's odd, I tested all of them and they all fit just fine! Are you sure you didn't mess with the sizing?
I didnt think I had. But I can double check. Thanks!
I cant get multiple colors to fill in, in my slicer. Can you add the colored version?
How a make the rounds with different colour?. it isnt easy to colour them i try
You can paint them in your slicer! They fill in very easy!
Would love to know what colors/ brands of filament were used on these designs CinderWings. I just love all of them. I'm a beginner :) So. Just starting to build my filament supply.
There is a link in the description!
Hi, hope this isn't a bad time, but do you know if the lock works at over 100%?
It should but it might get tight the larger you do. After a point you might be better off just using the regular eggs!
Hi ive downloaded this file and its not opening is there something ive done wrong please, as all the other files I download open perfectly and print perfectly
TRY CLOSING OUT AND REOPENING FILES. I WAS GETTING MULTIPLE ERRORS TRYING TO OPEN THESE FILES THE FIRST TIME , NOW THEY OPEN FINE
Can you please elaborate, what do you mean by "not open"? These are just regular STL files so they shouldn't be giving you any trouble! Did you unzip them from the ZIP?
I have tried to re download it tonight and its still doing the same thing, do you have a e-mail I can send the pictures through too please
contactcinderwing3d@gmail.com or you can join my discord (discord.gg/cindering3d)
On my printers (X1C, P1S, A1, A1 Mini), the closure of the dragon egg is too loose and can even be overtightened.
Additionally, the overhang inside the lid is less clean because some stringing is hanging around.
What am I doing wrong?
Hey there! I do recommend checking your flow and what not if the eggs are not fitting together and locking correctly! As for the inside of the egg, check your overhangs and cooling!
Sorry to bother you but I did not find a 3mf file in the packages. I printed the keychain version it at 90% with 0.4mm nozzle, 0.2mm layer height and 3 walls, with variable layer height. It only uses smaller layers on the top. Overally it looks good, but the egg opens too easily, could you make the lock mechanism a bit bigger? Or do you have an idea how to fix it?
Hi there! there is no 3mf! I need to edit the photos. As for the lock I'd recommend checking your flow and toelrances!