this might be to much but is there way you could release a articulated crocodile?

Like the Original Crystal Dragon, the Baby Version also needed updating. This is a release for the 2025 Remake for the BABY Crystal Dragon!  This design has the same updated links and crystals as the Adult 2025 Remake but while staying as close as possible to the look of the original baby version.
Thank you Admin Jazzy for the .3MF Color Files!
Addtional 4 color paint job by DragonFusion3D

I hope you all enjoy this remake as well! :)
---
Hi, I'm Tracy! Veteran, full-time mom, and entrepreneur at heart! I love creating unique and fun designs!

This design (like all Cinderwing3D designs) is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially.
If you would like to legally sell them commercially, please join my Membership and subscribe to the tier for commercial resale. Link Below!
The Digital files are never to be re-sold, shared, or given away!

[**For commercial license and monthly bonus models, click here!**](https://than.gs/u/1780858?plans=true&affiliateCode=jazzyplz)

[Filaments I use! Not an exhaustive list but if I remember, it'll be here!](https://www.amazon.com/shop/cinderwing3d)
Amazon Affiliate links!

---
**3D PRINTING SETTINGS**

**FDM Settings**
3 walls
10-25% infill
No supports
Try brims if you have adhesion issues.
Models tested between 60-100% generally

**Resin Settings**
No supports, flat on plate
50 um layer thickness
Light off delay can be helpful to let resin drip from links.

Proper bottom exposure tuning is recommended. Models, particularly in clear resins, can suffer from overexposure and fused links. The Ameralabs Town
testing is highly recommended to tune your settings as to get proper articulated prints! Exposure varies greatly between resins, printers, and environments.

Baby Crystal Dragon 2025

Discussions — Baby Crystal Dragon 2025