MALLA | woven bowl & plate, multi-purpose

MALLA | woven bowl & plate, multi-purpose

Multi-purpose set of woven bowl & plate. Use it as a key bowl, or for pot-pourri, dried flowers or other scented items. The woven pattern diffuses the scents much better than a classic glass bowl.

It comes in 2 sizes:

• a bowl (Ø150mm, H62mm)
• and a plate (Ø200mm, H 32mm).

The woven pattern can be printed by any printer with a classic 0.4mm nozzle.

Happy printing!

DIMENSIONS (bowl) | Ø 150 mm, H 62 mm

DIMENSIONS (plate) | Ø 200 mm, H 32 mm

3D PRINT SETTINGS All STL files are already oriented properly.

For the base plate, to achieve the woven pattern you have to turn off the top and bottom layers (set to 0), and pick an infill pattern of your choice (gyroid pattern on the pictures) with 30% to 40% infill. On top of that, for small nozzles, push the "infill line width" to about twice the size of your nozzle to extrude more material (so 0.8mm infill line width for a 0.4mm nozzle). The items in the pictures were printed with a 0.4mm nozzle.

To ensure a super clean and sticky first layer, push the "initial layer line width" to about 150% of your nozzle size. For a 0.4mm nozzle, that's a 0.6mm line width.

Layer height: 0.3 mm (no less, no more) Line width: 0.5mm (for a 0.4mm nozzle, so as to extrude a bit more material and achieve a cleaner weave) Wall line count (perimeter walls): 2 Top layers: 0 Bottom layers: 0 Infill: 30% to 40% Infill pattern: gyroid Infill line width: 0.8mm Build adhesion type: None Supports: None