tracking pixel
Michael M

Stained Glass Depictions of a Golden Hawk - Set of bookmarks

by
BooneCo3d
Follow
Follow
Remix Model
BooneCo3d
BooneCo3d
|
Image 1 of 5
Stained Glass Depictions of a Golden Hawk - Set of bookmarks 3d model
BooneCo3d
BooneCo3d
|
Image 1 of 5
Stained Glass Depictions of a Golden Hawk - Set of bookmarks 3d model
2D
3D
Makes
Stained Glass Depictions of a Golden Hawk - Set of bookmarks 3d model
Stained Glass Depictions of a Golden Hawk - Set of bookmarks 3d model
Stained Glass Depictions of a Golden Hawk - Set of bookmarks 3d model
Stained Glass Depictions of a Golden Hawk - Set of bookmarks 3d model
Stained Glass Depictions of a Golden Hawk - Set of bookmarks 3d model

First bonus for this week. This set is stained glass images of a golden hawk. It came together real well and I broke from my pattern of always having white as the final color to print.

For these models: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.9x200mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue At layer #12 (1.04mm) swap to Orange At layer #19 (1.6mm) swap to Yellow for the rest.


1 Likes10 DownloadsSeptember 16, 2024


1 Likes10 DownloadsSeptember 16, 2024