Celtic Wood Carvings of the Bounty Hunter Boba Fett from Star Wars - Fan Art set of Bookmarks

Another bonus set for week 10 and yes, it is Boba Fett again. He seems to be a strong seller and these were interesting designs. Give the appearance of old wood or trees carved. I can image them on display in his world somewhere.

For these models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 68.33x215.4mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Brown At layer #12 (1.04mm) swap to Beige At layer #19 (1.6mm) swap to Jade White for the rest.