Gift Box #14 Print-in-Place Version
This is the fourteenth version in a series of gift boxes that may all look the same on the outside but each have a secret way of opening. This one is like a combination lock, to open it rotate the outer and inner bow to the correct orientation which unlocks the top. If you need a clue, there is an arrow shaped indicator on the inner and outer bow. Match that up with the arrows hidden in the logo’s lightbulb on the bottom and it will open.
This is the print in place version that prints in only two pieces with the bows attached. The version that allows you to print the bows separately in a different color and glue them on is available here.
Printed with Sovol Forest Rainbow PLA.
Its roughly 100mm x 100m x 80mm tall. The top prints in place as one part, none of the parts require supports, designed for a .4mm nozzle. The bow and ribbons for the top are printed separately and glued on. I printed all the parts in the orientation the stl’s are provided in. I prefer the vertical orientation for the ribbons for a smoother surface finish. I added helper pads to them to keep them stable during printing. I printed everything at .2 layer heights but the box could definitely be printed at a larger layer height without issue.
Printed on the Muldex rep-rap IDEX printer.
Gift Boxes Season 1 Gift box #1 Gift box #1 Quantum Addition Gift Box #2 Gift Box #3 Gift Box #4 Gift Box #5 Season 2 Gift Box #6 Gift Box #7 Gift Box #9 Gift Box #10 Gift Box #11 Season 3 Gift Box #12 Gift Box #13 Gift Box #8 Gift Box #14 Gift Box #15
Support and Licensing If you would like to help support more free models please consider joining my Thangs Membership. Get permission to sell physical copies of my models by joining The Collapsing Arsenal