Cool model! 7-8 strings broke while printing in the bottom-most layer, but was able to remove most without breaking more strings. I don't have an enclosure, so one corner lifted causing a minor layer shift.
on a Bambu 1x-c what speed is appropriate for printing strings? I've tried several string art files, no strings. I'm just using the Bambu presets. Do change to arachne
Can you tell me which slicer you are using? If you are using bambu studio, click on the quality tab and scroll down to wall generator, change it to Arachne. Check your layer height is set to 0.2mm and slice. You should see the strings in your slicer preview.
Discussions — Suspended Rose String Art
Mmm lindo ,como tema rock pais fricción 80s enjaulado"
on a Bambu 1x-c what speed is appropriate for printing strings? I've tried several string art files, no strings. I'm just using the Bambu presets. Do change to arachne
You don't need to change the speed. Are you getting no strings at all? Can you tell me what your wall generator is set to?
I printed this but got now strings. I’m new to this, what did I do wrong?
Can you tell me which slicer you are using? If you are using bambu studio, click on the quality tab and scroll down to wall generator, change it to Arachne. Check your layer height is set to 0.2mm and slice. You should see the strings in your slicer preview.
What is the brand/color of the filament? Of the first 2 images.
The gold is Bambu Lab PLA Metal Iridium Gold and the strings are Blue Twinkling PLA by Sunlu. I've added my affiliate links below.
Iridium Gold: https://shareasale.com/r.cfm?b=2354730&u=3772708&m=138211&urllink=&afftrack= Blue Twinkling: https://www.sunlu.com/en-au/collections/twinkling-pla?sca_ref=4402565.4AejjDGDxf
what settings do you need for this on a ender 3 v2 neo please
0.2mm layer height, what slicer are you using?
the creality slicer