Lantern Bauble

2.2K downloads · 4 years ago · A screw together lantern bauble that will hold an led tealight. Can be hung on your Christmas tree

This model is restricted by licensing terms.

View license.

Description

A screw together lantern bauble that will hold an led tealight. Can be hung on your Christmas tree or on my Display tree.

Prints without supports.

There are four tree and two base options for my Christmas Bauble Display Tree, download links below.

Starry tree: https://social.thangs.com/m/523430 Minimalist tree: https://social.thangs.com/m/523482 Tree with filled star: https://social.thangs.com/m/523504 Standard tree: https://social.thangs.com/m/37472

Pot Base: https://social.thangs.com/m/523467 Hill Base: https://social.thangs.com/m/523452

Scroll down to 'geometrically related' to see other baubles to hang on my tree

Community Makes (2)

Community Makes (2)

Discussions

pauloapsilva4 years ago

Very, very nice idea for Christmas. I'm going to print the tree with the candle. Thanks for sharing!

uglies4 years ago

I had issues with the top being very fragile. I'll try printing it with 0.5 line width. Thanks.

djda9l4 years ago

Just as alexandre.forzy, I haven't been able to print this beautiful model. Mine also fails at the arches :(

Jeff Monson4 years ago

Try widening your line width...e.g. if you're using a 0.4mm nozzle, make your line width 0.5...the extra width allows you to stack tighter angles...you can also slow your print speed to help...start with 10% increments

alexandre.forzy4 years ago

Very nice but was unable to print it. The Lantern Bauble Top made spaghetti on the arches. Try 3 times with differents filaments. Will try with supports.

tannenba4 years ago

Very nice! Wish I had your talent.

3dprintbunny4 years ago

Thank you so much :)