Make in Bambu basic PLA red on the P1S. I'm excited to gift this to my father who LOVES jigsaw puzzles. I specifically kept this one color to make it "impossible."
Hi, I noticed that 2 of the puzzle pieces are fused as 1 and I'm having a hard time separating them. Any idea where I can download the 2 separate pieces?
Try open a new copy of the model, right click on it and choose 'Split'...this will separate the individual components, allowing you to print just the ones you need.
Do you have a copy of the original picture before it was turned into a puzzle? I would like to print this off as a gift and include a picture of what it is supposed to look like, but without the extra little clues that can be seen in the photos above.
There's an error in this model still T_T someone pointed it out in another comment and I just saw it in my print, two pieces print at the same time as one piece.
I'm having the same exact problem. I was thinking it was a troll of making the impossible puzzle, impossible to print. However, I see other people managed to print it out.
I created a test file of the upper left corner of 9 pieces to dial in your printer for this amazing print. I noticed though you don't allow re-mixes for this. May I post this test file to save others some work and frustration?
Discussions — Impossible Jigsaw Puzzle - print-in-place
Try open a new copy of the model, right click on it and choose 'Split'...this will separate the individual components, allowing you to print just the ones you need.
omg where did you get that treasure box for it??
This thing actually causes brainrot
I think that's your brain evolving
I think that's your brain evolving
This is very impressive, good job!
Do you have a copy of the original picture before it was turned into a puzzle? I would like to print this off as a gift and include a picture of what it is supposed to look like, but without the extra little clues that can be seen in the photos above.
Unfortunately I can't find the original picture but I have added a screenshot of the design before the pieces were cut out. Will this do?
That is perfect! Thank you so much :)
That almost hurts my eyes! 😳❤️
🙀
How do you add a second color? The stl only asks for 1 filament choice. (I'm relatively new to printing) Any help explaining would be great. Thanks.
Oh, so that’s why it’s impossible
There's an error in this model still T_T someone pointed it out in another comment and I just saw it in my print, two pieces print at the same time as one piece.
when i download the file and try and slice in orca it gets to 25% and just doesn't finish slicing any thoughts?
I'm having the same exact problem. I was thinking it was a troll of making the impossible puzzle, impossible to print. However, I see other people managed to print it out.
I created a test file of the upper left corner of 9 pieces to dial in your printer for this amazing print. I noticed though you don't allow re-mixes for this. May I post this test file to save others some work and frustration?
I'm having issues... I can't slice it in CURA.. what do you use? I tried 3 different formats as well.
I noticed 2 of the pieces were joined together in the model and cut them apart after printing. From the top left, 5 in, 4/5 down. Awesome model!
https://imgur.com/a/d5HOhRM these 2
is it me or does it look streched? I mean the puzzle pieces themselfes, not the motive.
They are a little longer in one direction, the idea being this makes it slightly easier to do the puzzle because you know which way round they are :)
Hi, how do you paint the black on once its printed?
You may be able to use your printer to pause it at whatever level and switch filaments, would be much easier if you can do that.
@mr.zeus7, that's really smart, thank you for the tip!