STLs for adding Printy Panel ports into any models. Works within your slicing software!
Printy Panels Video Printy Panels Updates Video
Options
- Lofted Port - makes an easier to print port
- Flat Port - makes a more shallow port for cases where a lofted port won't fit
How To Use the Port Punch These instructions are for Prusaslicer, but the basic process is the same on similar slicers.
- Add the model you want to customize into your slicing software.
- Right click on the model.
- Select “Add negative volume”.
- Select “Load…”.
- Select the STL for the port punch you want to use.
- Position the port as desired. Make sure the port sits on the surface of your build plate!
- Slice the model. Preview the results before sending it to your printer.
Port Pin
The port print is used as a connector between a Printy Panel and a print with a Printy Panel Port. One side of the port is slightly thicker to help it stay in the model. However, it's advised to glue the pin into your model to keep it from sliding out too easily.
Can I sell copies of this?
Yes! This project was shared under the Creative Commons - Attribution license.
This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.
Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.
This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.
Recommended Attribution Text
"Printy Panels - Port Punch" (https://3dprinty.xyz/project/115) is designed by 3D Printy (https://3dprinty.xyz) and shared under a Creative Commons Attribution (CC BY 4.0) license (https://creativecommons.org/licenses/by/4.0/).