tracking pixel
Erin B

Pixel Pineapple Fidget

by
3DPmom
Follow
Follow
Remix Model
3DPmom
3DPmom
|
Image 1 of 7
Pixel Pineapple Fidget 3d model
3DPmom
3DPmom
|
Image 1 of 7
Pixel Pineapple Fidget 3d model
2D
3D
Makes
Pixel Pineapple Fidget 3d model
Pixel Pineapple Fidget 3d model
Pixel Pineapple Fidget 3d model
Pixel Pineapple Fidget 3d model
Pixel Pineapple Fidget 3d model
Pixel Pineapple Fidget 3d model
Pixel Pineapple Fidget 3d model
This model is restricted by licensing terms. 

These Pixel Pineapples are the first in my “Fruit Fidgets” collection 🍍🍉🍐🍊

They come in two sizes and print in two parts: the pineapple body and the pineapple crown. The pineapple body comes in a large and small size. There is only one size crown (it fits both sizes of the pineapples).

Dimensions of Small Pineapple (assembled): 3 ¾ in x 1 ¾ in x 1 ¼ in. Dimensions of Large Pineapple (assembled): 4 ¼ in. X 2 ¼ in. x 1 ½ in.

Basic PLA is the best for this print. I don’t usually make recommendations on types of PLA but I don’t recommend PLA Silk or PLA Matte filaments for this print. It is very detailed (on the inside) and the tolerances are small. I printed several of these in these three types of filaments and Basic PLA always printed the best and had smoother “movement” when done.

Here is an Amazon link to filaments I recommend: https://amzn.to/4djh0ee

  • Layer Height 0.2mm

  • Infill 10-15%

  • Supports needed under the ‘peg’ at the top of the pineapple body that the crown fits onto. (Be cautious not to include supports through-out the model. This will fuse it together.)

  • Outside brim recommended for the pineapple bodies

I have also attached a 3MF file with the following print profiles: Print Plate #1: Small Pineapple body (1 color, yellow), supports added for ‘peg’, outside brim Print Plate #2: Big Pineapple body (1 color, yellow), supports added for ‘peg’, outside brim Print Plate #3: Pineapple crown (1 color, green)

To assemble place the pineapple crown over the peg of the pineapple body. You can add some super glue if you'd like:)

Have fun printing!


41 Likes92 DownloadsSeptember 2, 2024


41 Likes92 DownloadsSeptember 2, 2024
This model is restricted by licensing terms. 

Instructions

Filament • 0.2mm

Layer height0.2 mm
Infill density15 %
SupportsGrid - Manual