I just finished making the cup part which turned out awesome gotta do the scream face yet. I ran into a problem my spoons dont fit in the spoons slots. Haha. The handles are a little too wide at the end.. gonna have too buy some plastic spoons or different metal spoons too fit the slots. I'll post an image when its completed.
Thx, I don't want to be that guy, but could you do a file(s) for the blood on the handle (maybe it can be added to the blood on the rim) , and/or the blood on the knife tip, please. My grandson is going to luv this.
Like i wrote these are missing because they will have almost 0 surface on the bed print - they will most likely turn out very nasty - I'll try to add them but I won't test-print those parts due to what I wrote..
The printer is saying too use supports? Did you need sopports on your model? Im using the bambu lab h2d so im gonna try and print the mug with blood on it.
Hey,
I used 2 walls and 5% infill.
What you are describing is not a really a model issue but sounds like either filament/settings/printer issue - Layers splitting up should not happen on a simple model like this one
Discussions — Ghostface Ice Cream Pint Holder
Fixed - Thanks for pointing it out 🙏
Oh man, sorry about that - I made so many updates by requests to this model that I didn't notice - i'll fix it asap
Please make a chucky one 🥰this will be my nxt print
THESE CAME OUT GREAT WHAT ABOUT A ART THE CLOWN VERSION WOULD BE COOL TOO
I'm working on a few more :)
I just finished making the cup part which turned out awesome gotta do the scream face yet. I ran into a problem my spoons dont fit in the spoons slots. Haha. The handles are a little too wide at the end.. gonna have too buy some plastic spoons or different metal spoons too fit the slots. I'll post an image when its completed.
Sorry, tested it with quite big spoons so didn't think anyone would encounter an issue here 🫠
This is siiick. I hate trying to paint pla, never works out. Any chance you can separate the blood to slide on top?
Working on it
I agree with Twerrpzzz, that would make it simple for people without multicolor printers (like myself) if you can add that, please let me know! :)
Just finished the multipart version - will upload it later today
Thx, I don't want to be that guy, but could you do a file(s) for the blood on the handle (maybe it can be added to the blood on the rim) , and/or the blood on the knife tip, please. My grandson is going to luv this.
Like i wrote these are missing because they will have almost 0 surface on the bed print - they will most likely turn out very nasty - I'll try to add them but I won't test-print those parts due to what I wrote..
I'll do your testing
Uploaded the files - Check description
I'll add the version in a few days - Unexpectedly busy week 😅
i just printed the left handed cup and the blood seperate but the blood doesnt fit over top of the cup
Doesn't fit in what way? Can you upload an image?
What did you use for the black and red filament and the red color, what brand? It is a great red! Thanks.
The printer is saying too use supports? Did you need sopports on your model? Im using the bambu lab h2d so im gonna try and print the mug with blood on it.
Explicitly written in description above "Cup - print with tree supports." 😉
Yeah i seen the tree support comment after i asked so that was my bad. Lol
Could you change the spoon slots to fit any different handle spoons?
I'm not sure what change you are asking for, The slots are pretty big - what spoons do you think will not fit there?
Anyone try this one yet?
The cup print came out pretty good except for some layer splitting on the base and removal and the handle ended up being weak...
What infill and layer thickness did everyone use?
Hey, I used 2 walls and 5% infill. What you are describing is not a really a model issue but sounds like either filament/settings/printer issue - Layers splitting up should not happen on a simple model like this one