80 Likes340 DownloadsJuly 22, 2024
Print in place with no support and no assembly required. Just slice and print!
Has been test printed down to 60%.
Pre-painted file also included!
To legally sell the printed models, you can get my permission by joining our community on Thangs.
NOZZLE: 0,4 mm. LAYER: 0.16 – 0.20 OUTER WALLS: 3 INFILL: 10% SUPPORTS: NO Z-HOP: 0.8 BRIM: If necessary
80 Likes340 DownloadsJuly 22, 2024
80 Likes340 DownloadsJuly 22, 2024