This unique choker features a stunning geometric fringe design, 3D printed with a beautiful iridescent, metallic filament. Inspired by Art Deco aesthetics and the movement of a flapper dress, the piece is a modern statement accessory for any occasion. The cascading squares and rectangular segments are lightweight and flexible, creating a dynamic and eye-catching effect as they catch the light. The fringe can be attached to any ribbon or chain of your choice for a comfortable and customizable fit.

Printing on Fabric Instructions:

This design can be printed directly onto mesh fabric for a seamless floating look and then glued to a ribbon for wearing. For best results, use a holographic build plate to give your piece an extra touch of glamour!

For slicers other than Bambu Studio:

1. Set your print speed to a slow 35mm/s.
2. Set your layer height to 0.24mm.
3. Add a pause command to the G-code at approximately half the total height of the print.
4. When the printer pauses, carefully lay a piece of mesh fabric over your build plate.
5. Resume the print.

For Bambu Printers: Use the 3mf file. You may need to turn off the auxiliary fan to ensure the mesh fabric lays flat and doesn't get dislodged during printing.