littletup8.4K followers

Vampire chest of Immortality

202 downloads · 1 year ago · The outer shell pieces do need support underneath the ledges. I did supply fully supported Bambu sli

This model is restricted by licensing terms.

View license.

Description

The outer shell pieces do need support underneath the ledges. I did supply fully supported Bambu slicer files. Please check out the assembly video below. https://youtube.com/shorts/Bnro7_ExHeo?si=FHvVOu0aBsoWQ7_w

Community Makes (1)

Used a gold/red dual color filament. Came out great. The hinge pieces and inside liner pieces were a little tight but was able to get them to work.

Community Makes (1)

Discussions

ceejkay11 months ago

Used a gold/red dual color filament. Came out great. The hinge pieces and inside liner pieces were a little tight but was able to get them to work.

Venomuz1311 months ago

Love the model and the detail of these. I have the darndest time with the top lid insert. Tried printing it twice now and it failed. I'm trying now with a 10mm brim. Should I slow the speed for the top piece?

littletup11 months ago

If you're printing it on a bedslinger type printer I would probably slow it down if you're having problems

Venomuz1311 months ago

I did but I also used a brim just in case 😆