This has been my favorite wallet to make. It is ideal to print in 90a TPU, but 95a or flexible PLA will also work. It has space for 6 cards with 2 inner pockets for cash and an optional back pocket for other currency or documents. A saddle stitch is recommended for this. There are many in depth tutorials to be found by more advanced teachers than I am. I've included a brief demonstration, please keep in mind I am a novice.

There are individual 3mf files for Bambu, Orca, Snapmaker, and Prusa, in addition to individual STL files that can be loaded into the slicer of your choosing. There are 3 different front panels that are plain, or use 14mm or 18mm magnetic snaps like these - https://a.co/d/04aKzUld

To help with the fold, you can use a heat gun to heat up the spine of the wallet and set a heavy object on it while it cools.

I print these at a .2mm layer height with a .4mm nozzle. I prefer using the side that's printed down for the finished surface.

I have been further embellishing the TPU prints the F2 Ultra UV from xTool

If you have any questions please contact me at Kaizen3DPrints@gmail.com

License Summary: Personal use only unless you hold a Commercial License. No resale or sharing of files. Selling printed models allowed only with an active Commercial License.