This is a 3D print on fabric design. These can be used for fashion, accessories, fidget toys, placemats, coasters, art, etc. They take between 30 minutes and 3 hours, depending on the size and color complexity.

The first layer is printed, followed by a pause command at layer 2 (the 3mf file has the pause inserted). Place the mesh you're using on top of the first layer, and tension it with magnets. Resume the print after the magnets and fabric have been placed. Please see attached PDF for additional instructions if this is your first print on fabric. There are three sizes that are preloaded into the 3mf, in addition to two patterns. These can be resized along the x and y, just keep the z value the same at .72mm. The model is 3 layers at .24mm layer height. You can also download the STL file and add your own settings. I like printing at 35mm/s with most fabrics.

I used illusion mesh for the small example, and a superfine powermesh for the larger example. What color combinations can you come up with? These are printed on an inception style magnetic PFLAT sheet found at www.kaizen3dprints.com

If you have any questions, please send me an email at kaizen3dprints@gmail.com