Kickstand - Phone Stand for Soccer
2 downloads · 25 days ago · Want to sell physical prints of my designs? Get a [Commercial License](https://www.cubee3d.com/desig
This model is restricted by licensing terms.
View license.
Want to sell physical prints of my designs? Get a Commercial License <--
Phone Stand
A pocketable phone stand styled as a soccer ball — flip it open, prop the phone, watch the match. MagSafe or adhesive mount, with personalisable national flag for your nation.
Key Features
- Two mounting options: MagSafe (magnetic) or adhesive
- Personalised national flag flap — pick your country
- Folds flat behind the phone
- You will never miss a match again!
What You Get
- MagSafe version — body Ø 65 × 6.4 mm, flap Ø 46 × 3.9 mm | ⏱ ~1h 53m | ⚖ ~33.5 g
- Adhesive version — body Ø 65 × 6.4 mm, flap Ø 46 × 3.9 mm | ⏱ ~1h 47m | ⚖ ~35.5 g
- National flag cover — Ø 46 × 3.9 mm | ⏱ ~1h 8m | ⚖ ~18.7 g | Flag options: Argentina · Germany · England · Italy · Brasil · Scotland (more on request)
- Readme file
- .3mf files
Filament
PLA NX2 Matt from Extrudr find it here
Hardware Parts
For the MagSafe version:
- 18× magnets Ø 6 × 2 mm find it here
- 10× rubber feet Ø 6 mm find it here
For the Adhesive version:
- Double-sided adhesive tape find it here
affiliate links give me a commission at no additional cost to you - thanks for your support
Kickstand - Phone Stand for Soccer
2 downloads · 25 days ago in and
This model is restricted by licensing terms.
View license.



















.png&w=3840&q=75)



.png&w=3840&q=75)

.png&w=3840&q=75)






