Another variation of the Shoji Lamp, inspired by Japanese Shoji (Sliding doors made of a lattice covered with paper). The lamp creates a soft ambient glow in any space, creating a zen and calm atmosphere. The pieces all print without supports and fit through peg and slot joints so no glue is required. Try out different filaments such as transparent PETG or Matte PLA to get different textures and light diffusion! (Updated the 3MF file to include the correct "Top Frame" piece)

Instructions

• 3MF file and individual STLs are included
• Use a lower layer height such as .12mm for a higher quality finish and print (Optional)
• The bulb holder holds an E27 Socket with a 370mm diameter (A 380mm variation is included, do let me know what size sockets you use so I can gauge and model different variations as I move forward!)

Lamp Base and Exterior

• No supports required
• Everything is connected through peg and slot joints

Lamp Shade

• No supports required
• Print with standard settings for 0.8mm thick walls, or opt for a thinner shade by enabling "spiral vase mode" (Take note using vase mode with a thinner wall may lead to more wobbles in the print that may lead to uneven surfaces)
• When printing slow down the print by 25-50% to reduce the wobble of the lampshade during printing

Filament

• Kexcelled Light Brown Matte PLA (Lamp Base and Frame)
• ESUN White PLA+ (Lamp Shade)

Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://linktr.ee/xunodesign

Need help? Drop me a message here or DM me on Instagram! Check out my reel on Instagram or Tiktok to see how I made this!