I designed an Orb Planter, with a soft rounded minimal form. This was the original base for the "Lattice Orb Planter" but I thought it looked really nice as well without the lattice like structures. You can use the planter as a cache pot or plant directly into it as well. The planter also features a twist off drip tray that is seamless when attached.

Scaling Reference

• Original size: 129 mm inner diameter at 100% scale, fits ~120 mm pots
• 84% scale results in ~108 mm inner diameter, fits ~100 mm pots
• 68% scale results in ~88 mm inner diameter, fits ~80 mm pots
• Percentages are biased to make the diameter larger for some tolerance

Instructions

• 3MF file and individual STLs are included
• Use a lower layer height such as .12mm for a higher quality finish and print (Optional)
• No supports required
• Model can be re-scaled as required to fit your own planters (Refer to Scaling Guide)

Filament

• Kexcelled Olive Green Matte PLA

Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://linktr.ee/xunodesign

Need help? Drop me a message here or DM me on Instagram! Check out my reel on Instagram or Tiktok to see how I made this!