Henlo beans!!

Each bun sits inside its own little basket, and I also made matching lids/wrappers so you can close them up like tiny mystery takeout containers.

The wrapper banner is one long rectangle, so you can print it larger or smaller depending on your needs! You can hand cut it or Cricut cut it too - I cut mine by hand.

There are a few different bun variations as well! I wanted them to look like a tiny assortment you'd see at a cute dim sum place.

They're super tiny and really fun to fidget with while working, gaming, or watching videos.

I also included some little Bun Sticker PNGs!

---

WHAT'S INCLUDED

4x Bun Variety Clickers (Squinty Bao, Happy Bao, Squinty Dumpling, Happy Dumpling) STL & 3MF

Mystery Bun Wrapper

Squinty and Happy Bao PNG Sticker Design

Please only use these PNGs I included as a bonus for homemade stickers (they are located in the download hub without the background). The license for my PNGs does not allow production/manufactured stickers, other merchandise, or redistribution. Commercial use for homemade stickers is included for active Patreon subscribers with a valid commercial license.

---

RECOMMENDED PRINT SETTINGS

Layer Height: 0.16

Infill: 15%

Supports: Not usually needed

Filament: Matte or regular PLA

These are clickers, so they are not resizable. Make sure the bun is oriented correctly when placing it into the basket. Otherwise, it may sit too close to the edge and catch while clicking.

Adaptive Layers recommended for smoother effect.

---

CLICKER NOTES

A small amount of wobble is completely normal.

Clicker inserts naturally have a little movement to them, and since the dumplings sit on top of the clicker, they can be slightly top-heavy. Unlike embedded clickers that are surrounded by walls, these are exposed on top, so a tiny bit of wobble is expected.

This is not a design flaw - it is simply part of how clickers work. Personally, I think it adds a little charm since dumpling squishies wobble too.

The dumpling should still fit snugly onto the clicker and be difficult to pull off. If yours falls off easily, your printer may be printing slightly loose and you may need to adjust your settings or calibration.

Dark ring around the eyes?

Some filaments are more translucent than others. If you notice a dark ring around the eyes, try increasing your flush multiplier from 1.2x to 1.5x.

Missing the clicker attachment piece?

This small piece has very little contact with the build plate and may occasionally fail to adhere properly. If it is missing, try washing your plate, increasing bed temperature by about 5C, and reprinting the piece.

---

Hi there! I'm Mouse and I love art and 3D printing. I am inspired by cottage-core, fantasy, and kawaii things! Thank you for taking the time to read this.

If you like this design, please check out my other models: cults3d.com/en/users/StarMouse3D/creations

StarMouse3D creations are protected by copyright. These files are for personal use only, and you do not have the right to sell the files or the models without explicit consent from me.

To legally obtain permission to sell physical prints, you may obtain permission to sell every model as an active Patreon supporter through this link: patreon.com/c/StarMouse3D

Please do not share digital files. Thank you.

Please be warned that these models are not toys and are not recommended for young children or anyone at risk of a choking hazard. Small parts may break if handled roughly. Print at your own risk.

I make all of my designs from scratch in Blender without the use of AI.