I plan to upload 1 to 3 HueForge Paintings a month and at least 1 to 3 functional models.

Basic Plan

Cybernetic Woman(Hueforge)

Cybernetic Woman is a masterpiece! I had a lot of fun coloring this one and see how clean it came out.

150x150 size

Project Files Included

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
	PLA PolyLite Black Transmission Distance: 0.3
	PLA+ IIIDMax Navy Blue Transmission Distance: 6
	PLA+ IIIDMax Mystic Purple Transmission Distance: 6
	PLA PolyLite Pro Yellow Transmission Distance: 11
	PLA+ IIIDMax Light Blue Transmission Distance: 4
	PLA+ IIIDMax Light Pink Transmission Distance: 8
	PLA+ IIIDMax Baby Blue Transmission Distance: 11
	PLA PolyLite Natural Transmission Distance: 21

Swap Instructions:
	Start with Black
	At layer #8 (0.72mm) swap to Navy Blue
	At layer #9 (0.8mm) swap to Mystic Purple
	At layer #10 (0.88mm) swap to Yellow
	At layer #11 (0.96mm) swap to Light Blue
	At layer #12 (1.04mm) swap to Light Pink
	At layer #14 (1.2mm) swap to Baby Blue
	At layer #18 (1.52mm) swap to Natural for the rest.

Cybernetic Woman

Cybernetic Man (Hueforge)

Designed as a companion piece for the Cybernetic Woman

150x150 in Size

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
	PLA PolyLite Black Transmission Distance: 0.3
	PLA+ IIIDMax Navy Blue Transmission Distance: 6
	PLA+ IIIDMax Mystic Purple Transmission Distance: 6
	PLA PolyLite Pro Yellow Transmission Distance: 11
	PLA+ IIIDMax Light Blue Transmission Distance: 4
	PLA+ IIIDMax Light Pink Transmission Distance: 8
	PLA+ IIIDMax Baby Blue Transmission Distance: 11
	PLA PolyLite Natural Transmission Distance: 21

Swap Instructions:
	Start with Black
	At layer #8 (0.72mm) swap to Navy Blue
	At layer #9 (0.8mm) swap to Mystic Purple
	At layer #10 (0.88mm) swap to Yellow
	At layer #11 (0.96mm) swap to Light Blue
	At layer #12 (1.04mm) swap to Light Pink
	At layer #14 (1.2mm) swap to Baby Blue
	At layer #18 (1.52mm) swap to Natural for the rest.

MUNBYN LABEL HOLDER V2

As with all of my projects, I wasn't completely happy with the other solutions. When I started this project I knew I wanted to make it easier and quicker to print. This was designed to be used with Munbyn printer labels but should also work with other brands. In this version, I have reworked the sides and added a tray up top to save space on your desk.

**NEEDED HARDWARE**
4 - M4-0.7 x12mm Flat Head Screws

**3D PRINTING SETTINGS**
Layer Height - 0.2mm - 0.3mm
Material - PLA, PETG, ASA, ABS

Roller should be the only part that needs supports. The other parts make sure they lay flat.

Lower Tray.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

SpannMagoo