.png&w=256&q=75)
20x7.5 mm Hook (Bolt-Locked Insert)
This hook connects to a Moderate Multiboard Snap or Heavy Hook Snap and is secured using a Locking Bolt.
Keep in mind, Heavy Hook Snaps are stronger than Moderate Snaps but they don't work with flush mounted boards.
Printing Guidelines:
Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.
The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.
For more information about printer settings, click here.
This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts, for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io
20x7.5 mm Hook (Bolt-Locked Insert)
Cold Storage (Cards, Watch display, Generic storage)
Mutant V2 Interface Plates for Popular 3D Printers
Mutant V2 Interface Plates for Popular 3D Printers
Lattice Hearts
Nocturne — Cryptid Mothman ModBot (Halloween Release)
DELTA RIDGE | Table lamp E14 & E27 fast-print
Kitty Cutter v2 - Cardboard Cutter for Cat Scratchers
Swirl Wave (A)
Glock Fidget Keychain – Slide-Action Toy
Violet Earrings
.png&w=3840&q=75)
Printable Phone Stand 3mf and STL File V1
FN Five-seveN Fidget Keychain – Slide-Action Toy
PAW LEASH HOLDER / DOG ACCESSORIES / DOGS / LEASH HOLDER / DOG DECOR / DOG EQUIPMENT
Not So XL Easter Bunny - for smaller build plates
Not So XL Leprechaun (for smaller build plates below 300 by 300 by 300)
Crystal Lamp
Modular Infinity Cube
XL Easter Bunny - for larger build plates
Pencil Sharpener Tissue Box
.png&w=3840&q=75)
The vertical distance of the inserts part is 15.5mm instead of 13.2mm. Therefore it will not fit the snaps which is 13.2mm
Same here! Something is not right with this model
this doesnt work at all
So i guess the locker bolts are a size between the mid and small? What is the point of the flat ones without a slot for a screwdriver/coin nonremovable?
https://thangs.com/search/%22MB188%22%20creator%3A%22Multiboard%22?scope=thangs&view=grid
the locker bolts dont fit well into the hole
cannot find the bolt that fits into this thread at the back of the hook. Please help.
I'm gonna try with these:
https://thangs.com/designer/Multiboard/3d-model/Locking%20T-Bolt-1310062 https://thangs.com/designer/Multiboard/3d-model/Small%20Thread%20Hole%20-%20Locking%20T-Bolt-1310060
and I'm hoping it is exactly those that we need.
Unfortunately, the diameter or those bolts is a bit too large and the bolts are too short :/