Maple 3D Printing

A little later than usual but the Poll for the models next month is up now! Have a say in what gets designed for the Basic and Ornamental models next month. The top four at the end of the allotted time will be the ones that get made. You have until June 30, 11:59 pm EST to get your vote in! https:/

The poll for the possible Basic and Ornamental models in June is now live! Use your voice and help pick what gets made. You have until May 31, 5pm EST to get your vote in so dont wait too long and miss out. The top 4 by the end of the vote are the ones that get modelled. There is a section for sugg

April is just about over so it's time to figure out what's coming in May. Follow the link below and choose from the 10 available choices, the top 4 at then end of voting with be the picks for the Basic and Ornamental designs. Voting ends April 30 at 5pm EST so get your vote in before that. There is

It is time for another quick poll to figure out which 4 models get done in the Basic and Ornamental versions. Follow the link below and choose from the 10 available by March 31, 5pm EST. You also have a chance to add in any requests or suggestions for future models. I already have a few more Window

Sandslash is now available! This release includes both a Basic edition and a more detailed Ornamental edition, so you can choose between a straightforward display piece or something with extra flair and texture. The Basic version comes with a painted 3MF file for those running multi-color setups, m

Heracross has arrived! This model is available in both Basic and Ornamental versions, giving you the option of a clean, classic display or a more ornamental, stylized showcase piece. The Basic version also includes a painted 3MF file, ready for multi-color printing on compatible machines. Minor sup

I love designing these models and from the sounds of it, all of you love printing them so I went at this one pretty hard yesterday and got it done and ready for all of you to add to the collection! You have a solid version of the print that includes a painted 3mf file if you just want to print it

The skulls are back and this time it's the Legendary Lugia ready to be added to the collection! Both the Hollow and Solid versions will need a little support but it shouldn't be anything too crazy so both are still an easy print. There is also the Display Stand included if that's is how you prefer

The first files for the month are out now and we're keeping the Window theme going and finishing off the original trio with Bulbasaur! You should only need some minor supports on the body, under the mouth for this one so it's a pretty easy print. You have the full complete version which is painted

A quick thank you to those that voted in the poll and added their suggestions for future models! In the end of the voting we ended up with the following top 4 ZamazentaSandslashHeracrossFeraligatr As well as the Basic and Ornamental designs to look forward to you can also look forward to the Dioram

Use your voice and contribute to what gets made here! Follow the link below and choose who you would like to get modelled in the Basic and Ornamental versions. Top four at the end of voting will be the ones that get made. Voting ends January 31, 5pm EST. If you have any suggestions for other mode

The last models for the month are out now for all of you and no matter what kind of machine you have they will look great! The Arcanine Diorama comes in a complete version as well as split depending on your preference and the split version also has supported files for those with resin printers and

The last of the Ornamental and Basic models for the month is out now so go and grab Monferno and give it a print! You should only need minor supports if any for this one and you have the usual painted 3mf file for the Basic version. Enjoy!

Chomp Chomp! Sharpedo is out now in the usual Basic and Ornamental versions. You may need some minor supports here and there but I have sliced both versions so that it can be printed as easily as possible. You have a painted 3mf for the Basic version as well. Enjoy!

Another set of files are out now and today it's Exploud! These will need supports here and there and you have a painted 3mf file as usual for the Basic version. Enjoy!

Start your day off with a nice and easy print of Nidoran! No supports needed and a painted 3mf file for the full colour version. Enjoy!

The birds are all ready to fly together now that Ho-oH is out for you all to print! No supports needed for this one and a painted 3mf ready to go. Make sure to show off those final prints, I love seeing the finished product from you guys. Enjoy!

Just in time for the weekend project you can now go and grab a massive amount of files for your new Customizable Pokemon Chess Set! The top parts to the chess pieces are built off the same platform as the previously released chess set and this time you have 56 different toppers to pick through to m

The next addition to the popular window series is Squirtle and you can go grab the files now! There is a solid complete version if you wanted to print it in one solid piece or you can print it by individual colours piece by piece for the full colour effect. You will need some supports here and ther

HAPPY NEW YEARS EVERYONE! I hope you all had a great new years eve and are just as excited for 2026 as I am. To start off the year I chose to forgo the poll for the January Basic and Ornamental models and do some that have been close to breaking into the top 4 but could never quite get there. So fo

The last of the Poll picks for December is out now! Giratina can be printed in both the Ornamental and Basic version and both will need supports. You have a painted 3mf for the Basic version as well. There is the full complete model or a version with the arms removed for both designs. Enjoy!

Model 3 of 4 from the Poll results is out now! Tapu Bulu is looking ready to go but will need some supports before you get him off your printers. You have the usual Basic and Ornamental versions and the painted 3mf for the full colour treatment. Enjoy!

Hitmonchan is ready to fight for your printing time in both the Basic and Ornamental versions! Both versions will need supports and you have a painted 3mf file for the Basic version as usual. Enjoy!

This months Poll models are staring off with Xatu! Available in the Basic and Ornamental version, both will need minor supports under the beak. You have a painted 3mf file for the Basic version that can be done with just one AMS if you wanted the full colour version. Enjoy!

A quick post to let you know there is another model out today and this one is a Winter themed model, Snowman Gastly! No supports are need for this one and you have the regular version as well as a version you can hang on your Christmas tree. Both versions have a painted 3mf file that can be printed

More files for you to print are out today! Go ahead and grab the Solid and Hollow versions and get them printed! The solid version also comes with the usual stand and shouldn't need any supports where as the hollow version will need supports through out. Make it big and display it on your shelf or

Out today is Umbreon in two different versions, Life size and the usual model size! The model size is pretty standard stuff, minor supports will be needed under the chin but other than that you should be good and you also have a painted 3mf file for the full colour prints. For the life sized versio

Out today is some new house hold decoration in the Window Pikachu! Modelled after the popular Charmander promo card, the pikachu is ready to join the window. There is the solid version that may need some supports, a version split by colour so everyone can have a full colour print, and finally a pai

A bunch of stuff to go and grab today! The Alolan diorama and bust are out now for all of you and you can get them in a handful of versions depending what suits you best. For the Diorama you have a solid version that should work well on the FDM printers and shouldnt need too many supports to get a

November is just about done so grab all those files from this month before they get tucked away into the Archive! Everything that was released this month includes: Machamp SkullUmbreon DioramaUmbreon BustArticulating LugiaSleeping Xmas EeveeLife Size Promo Charmander Basic and Ornamental versions o

The final set of models from the poll results of last month are out now! These ones will need supports but that's just the nature of Dragapult, not the most print friendly character. You have a painted 3mf of the Basic version as well as a version with the little minis and without. Make sure you go

https://s.surveyplanet.com/ns9u7jki It is time again to take part in the monthly vote and use your voice to influence what gets designed! Follow the link and choose between the 10 available, the top 4 will be the ones that get modeled. Thanks for your help!

Hawlucha is ready to go in both the Ornamental and Basic versions so go grab the files and get to printing! You will need supports for these ones so make sure you have those settings dialed in to get a nice clean print. There is also the coloured 3mf file for those that want to go all out on this g

Another set of files are out for all of you today! Go ahead and grab the Basic and Ornamental versions of Shaymin. You will probably need some supports under the flowers and leaves on the sides, but other than that you should be all good everywhere else. You also have the painted 3mf as usual for t

The Charmander Promo model has been a popular one so I have done some updates to the model and made a big one for those that go life like! The original model has been split into each individual colour so even if you don't have an AMS you can still enjoy this one in full colour. Just head to the mod

The first of the Basic and Ornamental models for this month is out now so go and grab them and get printing! Pachirisu may need some supports under it's chin but other than that you should be all good. You have a painted 3mf file for those with an AMS and want the full colour treatment. Enjoy!

Christmas is at the top of a lot of peoples list so why not add to your Christmas decor with a festive sleeping Eevee! Everything has been split into each colour so you can get the full colour version without an AMS. You might need some minor supports but nothing too crazy. Enjoy!

Another one of the articulating minis is out now! Lugia is ready to go with a 30 minute print with no supports and a 3 colour 3mf file for those that want the full colour treatment. Super simple and easy print to play around with so why not give it a print?! Enjoy!

The files for this month are starting off with Machamp's Skull! You can get this one in both the solid and hollow versions as well as a version that sits in the included display stand. The hollow version is the only one that will need any supports Enjoy!

Thank you to all of you that voted in the poll and contributed to what models get made this month! For November you can look forward to getting these four in both the Ornamental and Basic versions DragapultHawluchaShayminPachirisu If you have any recommendations for next month make sure you comment

More Ornamental and Basic models are out now for you to print! You can now go and grab the files for Beedrill. Both models may need some small supports depending how your machines handle overhangs. You also have the full coloured 3mf file for those with an AMS. Enjoy!

Go ahead and grab some new files today! Ornamental and Basic versions of Snubbull are out now. You should be able to print both versions without supports and you have a painted 3mf file for those with an AMS. Enjoy!

This months Diorama and Bust are out now! For the Diorama you have two versions available to you, Dragonite attacking or not attacking. All of the files come pre supported for resin printers as well as has the working Lychee file for any personal updates you may want to make to the files. The whole

Go ahead and grab the newest files out for all of you today, the Articulating Legendary Birds, mini version! All of these can be printed without supports and on my Bambu I printed them in about 30 minutes so nice and quick. You have painted 3mf files for all three of them if you wanted to go for th

A new Nintendo Switch dock is out now and there are versions for the original, OLED, and Switch 2. Just print out the frame for the Switch version you have as well as all the pieces for the Bulbasaur design. Depending how your bridging is you may need some supports on the Bulbasaur frame where it c

The first files for the month are out now! Go and grab the files for the Mega Charizard X skull and print either the solid or hollow versions for some new decorations this Halloween. The solid version shouldn't need supports for the FDM but the hollow will need supports on the inside and for the ey

Thank you to all of you who participated in the poll! I have the results all counted up and here they are. You can expect the following in both Ornamental and Basic versions... ArceusBlazikenBeedrillSnubbull Aside from those 8 models you can take a look at the Diorama concept I have in progress alr

Follow the link and vote for what you want to see made in October! https://s.surveyplanet.com/fepd372e Possible models are: BeedrillNidoran (F)HoothootArceusSnubbullScraftyPidgeotPolitoedBlazikenParas Click the link and vote! https://s.surveyplanet.com/fepd372e

The last set of models from poll results is out now! you can go and grab both the Ornamental and Basic versions of Toxtricity, both needing a little support in various spots but overall, not too crazy. As usual you have the painted 3mf for the Basic version if you want the full colour treatment and

New Basic and Ornamental design for the third model from the polls is out now and it is Cleffa! You should be able to print these without supports or with very minimal supports. You also have a full colour 3mf file that can be done with just one AMS. Enjoy!

Two more models are out for all of you now and they are some of the newest Mega's announced! You can go and grab the files for both Mega Raichu X and Mega Raichu Y, both available in a painted 3mf file for the full colour treatment and I have split the files so that they're easier printing. Enjoy!

The diorama for this month is now out and I love how it all turned out! You have a bunch of files to go grab starting with the main diorama itself all split for easier printing and to make it even easier for you on the resin printers you have pre-supported files of all the pieces so you can get thi

Another two models are available for you today and it is the second set from our poll results. Elekid! Ready in both Basic and Ornamental you should be able to print these with just some minor supports here and there and you have a painted 3mf file ready to go for the full colour version. Enjoy!

New models are out now and this time it's the Basic and Ornamental versions of Chespin! You will most likely need some supports under the head but other than that you should be ok. You also have a painted 3mf file for those with an AMS and want the full colour version. Enjoy!

Another skull is waiting for you to download and print! You can go and grab the Legendary skull of Suicune in a few different versions. You have your usual solid and hollow versions, the display stand for the solid versions, but I have also done a broken version of the skull. The broken version has

Coming to you soon in September you can look forward to the following models and more! I no specific order for the Basic and Ornamental models you have... ToxtricityCleffaElekidChespin You can also look forward to another Diorama with this one featuring Wailord and Magikarp based off the Tag Team T

Another two models are out now and you have the usual Basic and Ornamental versions ready in both a solid and split version for easier printing. All versions will need some supports but nothing too crazy to get a good clean print. You also have the painted 3mf file for those with an AMS and want th

Use your voice and vote on the next set of models that I will create! There is also a spot for suggestions if you have any ideas for the future. Thanks! https://www.surveymonkey.com/r/6YYS37P

New models are out today and this time its Fraxure in both the Basic and Ornamental designs. I have split the side teeth from the main body so its an easier print but you will still probably need a couple supports to get a clean print. You can also grab the painted 3mf for the Basic version and tha

Two new models are out now and its everyone's favourite cow! You have the usual Basic and Ornamental versions and both can be printed without supports. You also have a painted 3mf file for the Basic version which can be done with just one AMS with some strategic pausing. Enjoy!

Another big set of files coming out today and this time were back in the Digimon world! You can go and grab the full Diorama and Bust of Greymon. Both sets of files come with a set of pre-supported files for the resin printers and a painted 3mf file of the Bust. You also have the working Lychee fil

New files are out now and you have a few versions to choose from! You have Cacnea in the Basic and Ornamental versions, both of which can be printed without supports and you have a painted 3mf file for the Basic version if you have an AMS ready to go. You also have a Planter version as well if you

Halloween is coming soon so why not add some new skulls to the collection! The Agumon skull is out now and you can grab a few different versions depending on how you want to display this one. You have the solid version that can be placed on to the included display stand or the regular version if yo

There are a bunch of new files out now all revolving around the Mewtwo & Mew Tag Team promo card from the TCG. You have the main diorama which has been split for easier printing and then you have the pre-supported files for the resin printers as well as the working Lychee file if you wanted to

New model is out now in both the ornamental and basic version. both can be printed without supports and you have a painted 3mf file for those that want the full colour treatment. The model has been split for easier printing and 4 colour printing. Enjoy!

Just like the previously released flexi's these can be printed without supports and take no time at all to get off the printer. Enjoy!

New model is out now and it wont need any supports! You also have a fully split version so even if you dont have an AMS you can get a full coloured version of the adorable Eevee fast asleep. Enjoy!

You can now go and grab a handful of new designs for the previosly released TCG Hand Holder. There are 2 Pokemon themed ones and 5 One Piece versions. They will all need an AMS to print the designs. Enjoy!

Two new models are out now! The Ornamental and Basic versions of Ludicolo are ready for you to run off and print and you wont need supports for either version. I have split the hat from the body so everything comes out nice and clean and you have a painted 3mf file for those that want a full colour

Hey everyone! The people at Lychee have reached out to me and have kindly given me the opportunity to extend an offer to all of you. If you use the code lychee-maple3d you can now get 2 months of the Plus version of their slicer for Free! I have been using the Lychee slicer for all my resin prints

I have just released some simple silhouette flexi's that you can print off pretty quickly if you want something to play around with. All of them can be printed without supports and on my Bambu's they take less than an hour to print one. Enjoy!

New file is out now! You may need a few supports on the bottom of the "shell" but other than that you should be good. You also have a painted 3mf file for that want the full colour version but for this one you will need multiple AMS. Enjoy!

New model is out now! No supports needed and a painted 3mf file is ready to go! Enjoy!

New model is out now! No supports needed and a painted 3mf file for those that want the full colour version. Enjoy!

New model is out now and this one wont need any supports. You also have a painted 3mf file for those with an AMS and want the full colour version. Enjoy!

New model out now that wont need any supports to print! You also have a painted 3mf file for those with an AMS and want to make use of it. Enjoy!

New model is out now so grab it and get it printed! No supports needed for this one and you have a painted file ready to go for those that have an AMS. Basic and Ornamental as usual. Enjoy!

Two new planters are out now! Super easy prints to bring some extra life to your garden. No supports needed and both fit a 3.25" pot at 100%

The dock that started it all for me is back for the new Switch! Grab it in a one piece version or split or even the already painted 3mf file if you wanted to go full colour. No supports needed for this easy to print accessory. You have access to all the USB inputs on the side and the main cords tha

A super simple print for those into TCGs or card games like UNO! This hooks on to the side of the table with the clips that slide into the back grooves. Once you're done you can pull the clips off the back and slide them into where your cards sit for a nice compact accessory. It holds up to 14 card

The Angemon Skull is here and it’s bringing some holy power to your print queue. Supports are needed for this one, but the model’s been split for easy color printing and oriented to make the process as smooth as possible. Whether you're into Digimon, cool skull designs, or just want a unique piece

The Veemon Skull is out now and ready to print with zero supports needed. This one’s got a clean, stylized design that makes it a fun and easy project for fans of Digimon or anyone into unique skull models. It’s a quick print and a great addition to any collection, whether you're going for cool, cr

Empoleon is here and ready to bring some royalty to your shelf. This release comes with both a Basic version for a clean, simple print and an Ornamental version with extra flair for a more detailed display. No supports are needed for either, so it’s an easy print all around. And if you want to skip

Just a quick post to let you know that there are now two new bottoms to the Deck Case, a version that now has two rows that can hold Top Loaders if you want to store all your higher end stuff in there and a Basic version that is just empty that you can toss whatever you want in.

Just a quick post to let you know there is a new version of the Deck Case-Single. This one uses two clasps, one on either side, instead of the hinge to give you a more secure hold on to the main box. There is also the Team Rocket lid already included as well and you have a AMS version and Non AMS v

Omastar is back from the ancient depths and ready for your print bed. This release includes both a Basic version for a straightforward, clean look and an Ornamental version with extra detail for a more dynamic display. No supports are needed for either version, so it’s a smooth print from start to

The Cubone Shadowbox is here, bringing a bit of TCG nostalgia to your 3D prints. This design is based on the classic Cubone card from the Fossil set and captures that same somber vibe in a layered, display-ready format. The individual pieces slide neatly into the box frame, which does require some

Just a quick post to let you know that there is now a single version for the previously released Deck Case that holds just one deck and I have also added in a Team Rocket lid for the original Deck Case. For the Team Rocket lid there is an AMS version and a version for those without an AMS. I would

The Sableye Skull is out now and it's got a few versions to choose from depending on your style. There’s a solid version with the eyes, a solid version without them, and a hollow version with the eyes removed—so whether you're going for spooky, sleek, or something in between, you're covered. Some s

Drednaw is ready to charge into your collection with a brand new release. You’ll get both a Basic version for a clean, straightforward print and an Ornamental version with extra details to really make it stand out. Some supports will be needed for both versions, but the final result is well worth i

This one is as much for me as it is for all of you guys! The Deck Case can hold up to 100 cards double sleeve or 60 cards plus the Accessory Box. There is also room on the sides for your Leader/Commander to be stored in either a top loader or snap case. You wont need any supports so it's a pretty s

Drowzee is here and ready to hypnotize your print queue. This release includes both a Basic version for a simple, clean look and an Ornamental version with some extra flair for display. No supports are needed for either, so it’s an easy print from start to finish. And if painting isn’t your thing,

Pinsir has arrived and it's ready to bring some serious attitude to your collection. This release includes both a Basic version for a clean, classic look and an Ornamental version packed with extra detail. Some supports will be needed for both versions, but the print is straightforward and well wor

Nidoran is ready to hop onto your print bed with a brand new support-free release. This drop includes both a Basic version for a clean, straightforward look and an Ornamental version with extra details if you’re after something a little more eye-catching. Both versions are optimized for easy printi

This one was born out of necessity for myself but I'm sure some of you can get use out of it too. I needed somewhere safe to store my One Piece TCG Playmat and didn't like anything that I could find so I designed my own. This prints in 3 pieces all without supports and keeps your playmat nice and s

Another skull is out now and you have a few different versions to choose from. There are the standard Solid and Hollow versions but I have also split the forehead jewel from both so if you wanted to you can print that in maybe a red silk and add it in after for a bit of flash to the skull. The soli

Fennekin is here and ready to print, no supports needed. This release includes both a Basic version for a clean, simple look and an Ornamental version with extra details for a more dynamic display. Whether you're a fan of its fiery charm or just looking for a fun new print, both versions are easy t

Golduck is ready to dive into your collection with a support-free 3D print. This release includes both a Basic version for a clean, simple look and an Ornamental version with extra details for a more dynamic display. Whether you're a longtime fan or just looking for a fun new print, both versions a

Axew is here and ready to join your collection. This release includes both a Basic version for a clean, simple print and an Ornamental version with extra details for a more dynamic display. Supports will be needed for both, but the final result is worth it. And if you want to skip the painting proc

Sableye has emerged from the shadows and is ready to print. This release includes both a Basic version for a clean, simple look and an Ornamental version with extra details for a more dynamic display. Supports will be needed for both, but the end result captures Sableye’s mischievous charm perfectl

This one has taken some time to get all put together but I finally made it to the end! Straight from the Tag Team TCG card featuring Mega Sableye and Tyranitar you can now print the artwork in 3D. This one will look best done in resin but for those that only have an FDM printer there is a solid ver

The Groudon Skull is here, bringing some prehistoric power to your 3D printing lineup. This release includes both a solid and a hollow version, plus a custom display stand for the solid skull. To make printing easier, the model has been split into three pieces, though supports will be needed. Wheth

Froslass has arrived, bringing its icy elegance to your 3D printing lineup. This release includes both a Basic version for a clean, classic look and an Ornamental version with extra details for a more intricate display. Supports will be needed for both, but the final result captures Froslass’s ghos

Seadra is here and ready to make a splash. This release includes both a Basic version for a clean, simple print and an Ornamental version with extra details for a more dynamic display. Supports will be needed for both versions, but the end result is well worth it. And if you want to skip the painti

Toxicroak is here and ready to print, no supports needed. This release includes both a Basic version for a sleek, straightforward look and an Ornamental version with extra details for a more dynamic display. Whether you're a fan of its sleek design or its menacing stance, both versions are optimize

Another two models are out now and they are the Basic and Ornamental designs of the cuddly Bewear! You wont need any supports for these so it's a nice and simple print for eveyone. You also have a painted 3mf file for those that have an AMS and want the coloured version. Enjoy!

Apologies for the delay in the next release for all of you, there has been a nasty run of flu's and colds running through my family so it's been tough to get the computer. On top of that I wanted this next design to be just right and it's taken sooo much trial and error to get this one just how I w

We're starting the month off with a bang! You can head on over to the website now and grab the Awesome looking Tyrantrum Skull in a few different variations. There are the typical hollow and solid versions but I have also made a simple display stand that the specific solid version can slide on to.

The last of this month's Ornamental and Basic models is out now and if you have been following along you knew that Cresselia was the last of the bunch. This one will need supports but I have split the rings from the base body so that it is an easier print for both the ornamental and basic versions.

The next release in the Ornamental and Basic versions is the big and beautiful Tyrantrum! You will need some supports under the chin and under the torso but everywhere else should be ok to be without. You have a painted 3mf file for those that want to do the full coloured version as well. Have fun!

You can now go and grab the set of Ornamental and Basic versions of the lovely Gardevoir! Minimal supports may be needed depending how your printers handle small overhangs but I have done my best to keep the design true to the original while still making a printer friendly design. You also have a p

The next part to the Villain Series is out now and there's only one more to go after this one. This time it's Team Plasma that Pikachu has joined up with and just like the others you have a painted 3mf ready to go. You will need supports between the feet but otherwise you should be all good. Enjoy

Yet another one is out for all of you and in part 5 in this series you can go and grab the Team Galactic variant of the lovely Pikachu! Just like all the previous versions you will need some supports between the feet but you should be all good everywhere else. You again have the painted 3mf file re

Pikachu is looking sharp in his orange suit now that he's a part of Team Flare! Supports will be needed between the feet but that's it for this one. You have a painted 3mf file ready to go as well.

The next addition to the Villain Series is out now and it's the ocean loving Team Aqua that has taken our beloved Pikachu for their own! This one will need supports between the legs just like the last but other than that you should be good to go. You also have the painted 3mf file ready for those t

I have a new Villain collection come out to you guys piece by piece and the first one is none other than the iconic Team Rocket! You can go and grab the Team Rocket Pikachu now as a regular stl or a painted 3mf if you wanted to do a full coloured version. The coloured version will need 6 colours so

The Wigglytuff 3D model is here, and it’s available in two variations: the Basic version, perfect for a clean and simple display, and the Ornamental version, featuring beautiful decorative elements that enhance Wigglytuff’s charm. Both models are designed to be support-free, making them easy to pri

It's time to add some Pokemon flare to your walls and I think I have the perfect piece for you guys! Go grab the files for the Ancient Mew Plate and get it printing without any supports. You have an added hook piece to print off if you would like to hang it up! Enjoy!

Unveiling my latest design: a Latias & Latios Diorama inspired by their stunning appearance on the Tag Team card from the Pokémon TCG! This intricately crafted 3D print captures the iconic duo in a dynamic, mid-air embrace, symbolizing their unbreakable bond. Perfect for fans of the Pokémon TCG

I'm stoked to announce the release of a support-free 3D print model of Kingler, the beloved crab Pokémon! This highly detailed design comes in two fantastic variations: a Basic version, perfect for quick prints and fans looking for a clean and simple display piece, and an Ornamental version, featur

Christmas is almost here and why not print out an adorable Victini model for yourself or someone as a gift?! You can now go and grab the Ornamental or Basic version and print either without supports. Enjoy!

Two new files out for you today and they are the Ornamental and Baic versions of the adorable Magby. Both versions can be printed without supports so there's no reason not to give this cuddly guy a print! Enjoy!

A fun and quirky model for you all to print is out now and it wont need supports either! You can go and grab the files for this adorable Flame that is ready to hang on to your keys, coins, phone or whatever else you dare throw in it's mouth. There is a solid model or a split version if you want to

You can now go and grab the Ornamental and Basic versions of Shinx! Both will need some supports under the ears but other than that you should be good to go without. Enjoy! 03

Out now is a little bit of nerdy home decor. You can go grab the new Fossil Frame, The original art was from Pokemon Crystal as a puzzle in the game but now it's a piece you can hang on your walls. You can print this without supports, either vertical or horizontal, I have provided a version with a

Another new model for you guys today and this time you can go and grab the winter ready Spheal. This one will need a little support but nothing too crazy. You also have a painted 3mf file for those that do the multi coloured printing. Enjoy!

Something a little different from me today, I was feeling like switching it up a little bit and try something a little creative but still stay on the Pokemon train and this is what came out. You have a Broken up Pikachu Sculpture with some crystals growing out of the crack. It wont be for everyone

Get those printers going and slice the two new files ready for you now! You can go grab the Nidoking Skull in either the Solid version or Hollow depending on your preference. The solid one can be printed without supports while the hollow version will need some under the top of the skull. Let me kno

Another two models are out now for you wonderful people and this time you can go and grab the Ornamental and Basic versions of Machop! You will need some minor supports for both versions but I tried to get him into a good looking pose that cut down on the supports you will need. Enjoy!

Another drop of files is out now and this time it's both the Ornamental and Basic versions of Meowth. I have split the whiskers from the main body so you should be able to print this one without supports but if your machine needs them, make sure you do what works for you. Enjoy!

Another two models are out now and ready for you to print! you can go and grab the Ornamental and Basic versions of Zorua. You should be able to print both versions without supports but you know your machines best so do what you think is right for you. Enjoy!

Something a little different from me today and now you can go and grab this super easy to print Fox Decoration. You wont need any supports for this one for the FDM printers as long as you set it on the back. Whether it's for the holidays or just around the house, I think this one will look great re

You can now go and grab a bunch more front plates for the previously released ornaments! This batch includes 12 Pokemon plates, 9 One Piece plates, and 4 Dragon Ball plates! All can be printed without supports just like the last ones and pair up nicely with the back plates from before. Enjoy!

New models are out now and this time you can go and grab the Basic and Ornamental versions of Meganium! Both models can be printed without supports so it's a nice and simple one for the FDM printers. Enjoy!

Happy Monday everyone! You can head on over to the profile page or into your files and grab the new Customizable Christmas Ornaments now! You have 6 different front plates you can combine with 6 different back plates to make your own versions. They can all be printed without supports and printed ve

The last model for the month is out now and as you can see from the pictures, you now have Aerodactyl ready for you to print. as usual you have both a Basic version and the decorative Ornamental. The wings have been split from the body on both the Ornamental and Basic versions but you will still ne

It's time for another free file Friday and this week you can go and grab the Rowlet Phone/Nintedo Switch holder! This one is a super easy print that doesn't need any supports and is broken up into pieces so you can print everything in the colours you need regardless if you have a MMU printer. Make

Multiple versions of Morpeko are out now! you can grab the Happy, Hangry, or Ornamental versions no and print your favourite. All can be printed without supports so no reason to not print this little guy. Enjoy!

It's time to start your Friday off with another Free file and this week you can go and grab the awesome Legendary Dice Tower! This model wont need any supports so it's a nice easy one to add some flair to those dice rolls.

I hope everyone is having a great week so far and you're itching for something new to print. If you are, you can now go and grab the Support Free Knit Rowlet file and get this adorable little guy all for yourself. On top of the regular stl you also have a painted 3mf file that has a 4 colour and 6

I know I know, Halloween hasn't even happened yet but Christmas stuff is already trending so if you are looking for it then here you go! Out now you can grab the figure heads from the Straw Hat pirates, the Going Merry and the Thousand Sunny. Both can be printed without supports and I have split u

Show off those Starters in a whole new way with this display! Go grab the files for the Starter Skull Stack and add a little more to your Halloween decorations. Charmander is really the only skull that should need supports for the FDM printers but you know your machines best so do what feels right

For those that want something fun and easy to print this week's free file is your favourite fish, Magikarp! There are painted 3mf files ready to go in either a four colour version or a six colour version if you have more than one AMS. Even if you don't have multi colour, Magikarp always looks great

The other half of the Charmander promo card is out now for all of you! This is a nice, quick, and easy print whether you want to have it on the other side of the window of Charmander or you just want a Pidgey to hang out with. You shouldn't need any supports for this and I have included a painted 3

I have just released another two models for you wonderful people and this time you can grab the Ornamental and Basic versions of Spheal! Both can be printed without supports on FDM and you have a painted 3mf file for the Bambu and Prusa machines. Enjoy!

I hope you all are having a great start to your week and ready for some new models! You can now go and grab the Ornamental and Basic versions of Joltik which can both be printed on FDM without supports. I have also provided a painted 3mf file for Bambu and Prusa machines for the Basic version. Enjo

Happy Friday everyone! Today I have a new addition to the Free models, New Deck boxes, and updates to the collection from last week. As you can see from the above picture, the Free model for this week is the adorable Bulbasaur Diorama. This model only needs a little support on the FDM printers and

It has been an absolutely jam packed month of models for all of you wonderful people and I have 2 more to finish it off here on the last day of the month! You can go and grab the Ornamental and Basic versions of Lycanroc now over on the profile page. Both versions can be printed without supports so

Hang on to your butts because there's a lot coming at you today! You can head on over to the Maple page now and grab a ton of stuff for your favourite TCG. First up you have a set of 5 different Deck Boxes that can all be printed without supports and can fit a deck of 60 sleeved cards with room to

I hope everyone is enjoying their Sunday and you're looking for the next thing to get on to your print beds. You can go grab the next addition to this month's releases, Flygon Ornamental and Basic versions. I have split the wings from both versions so you can print everything without supports. No n

You guys all loved the Charmander promo card print I knew I had to keep it going and why not have the next one be the adorable Bulbasaur sleeping. This one shouldn't need any supports and you have a painted file ready to go for the Bambu and Prusa machines. If you have any other favourite promo car

It's Wednesday and you're almost through the week already! But why not break up the week with a little more of the favourite fire starter and go and print the Charmander skull that is out now over on my profile page? As usual for the skulls you have a solid and a hollow version. The solid version s

Those of you that are collectors of the TCG probably know this card well. It came out as a Promo card in the Obsidian Flames ETB and was one of the reasons I had to go out and grab one for myself. After going back into my collection to add some new cards I figured this would make a great print! You

Just uploaded now as part of the Thangs Throwback I have just reuploaded the popular Knit Gengar model! This guy doesn't need any supports and has a painted file for the Bambu and Prusa machines ready to go. Go download this set now and show off those finished prints in the Maker Showcase for a cha

Last post today I swear! I just finished uploading this monster set of files and added it to the Welcome Package for all of you wonderful people. It has been almost a year since I designed this set and it is still one of my most favourite projects to date. Everything can be printed without support

We're doubling up on the releases today and I have another easy and fun one for you all to print! After doing the Snorlax Candy bowl I felt this one was a bit of a no brainer for those that are familiar with Buu from Dragon Ball Z. Buu looooooves his candy so why not fill his head with some of your

Pokemon don't always have to be cute and adorable so let's go ahead and print this Monster Pikachu! The top teeth are printed separately so you wont need any supports for this guy. Enjoy!

Go grab the files for the new Snorlax Candy bowl now! No supports needed and a painted 3mf file for the Bambu and Prusa machines. Om nom nom!

More plates have been added to the Decorative Lantern model page!

This one was a spur of the moment design and I really like how it turned out. You can grab the files for this super easy to print Decorative Lantern now. It has been broken into parts to make sure that you can print it all without supports and change out the design plates to suit your mood. Conside

It's time to start getting into the mood for the Halloween spooky season so why not start the month off right with the skull of the Legendary Mew! The solid version should be good to print without supports but if you go for the Hollow version you will likely need some on the inside. Enjoy!

The newest model is out now and as you can see from the picture it is the legendary Rayquaza! You should be able to print this one without supports but do what you feel works for your machines. Enjoy!

Out now you can grab the Ornamental and Basic versions of the lovely Bellossom. Both can be printed without supports for FDM as the head flowers are printed separately. Enjoy!

Well I have been slacking on the announcement posts but I hope you haven't missed out on everything released this month so far. Make sure you take a look through the releases and show off those prints. Just released now is the Knit Piplup that can be printed without supports and has a painted 3mf f

Another month is here and that means more files for you to print! First up you can go grab both the Gastly evolution line diorama or the Dice Tower version. Both can be printed without supports and come with a painted 3mf file for the Bambu and Prusa machines. Lots to come so stick around!

Another month is here and that means new files for you to print. Head on over to the main page and you can grab either the new Bulbasaur Diorama or if Dragon Ball Z is more your thing you can grab the Perfect Cell Skull! Both will need minimal supports but it's nothing you guys can't handle. Have f

Show off your books in style and add the Mecha Frieza Bookends to the shelf! Cut in half like Trunks just showed up, Frieza will look great up on your shelf and hold your collection in place. Supports will be needed uner the arm but I suggest orienting the prints on their sides to limit the amount

Branching out a little into the YuGiOh world you can now go and grab a print in place, painted 3mf file or stl of the fur ball Kuriboh! Have fun!

Celebrate the new show by printing your very own Vault-Tec Bobble Head! Some supports will be needed under the arms but you can print the head and spring without supports. A painted file has been included and the Letters for the base have been split to minimize the filament changes. More of the bob

I have just finished this print in place cozy Knit Gengar model. You can print it with or without the portal blanket and you have painted files for Prusa and Bambu!

Add to your Easter decorations with some Pokemon themed eggs! These come in solid or split versions that snap together and can hold those yummy chocolate eggs inside! Painted files for Prusa and Bambu are included with the regular stl files and they can all be printed without supports.

I know what you're thinking, another model?! I haven't even printed the other ones from this week yet! But just in case Dragonball Z or DnD isn't your thing I thought we would get some Digimon into the mix as well.  So here you have a support free adorable Terriermon with an included painted 3

I hope you have a printer free and could still use some more Dragonball Z in your life because I just uploaded an Articulating Goku that wont need any supports! I printed my versions at a 0.2 layer height  and added a brim for mine as I was having some adhesion issues.  Not much else to i

Well this is another one of those, I needed to switch it up and keep things fresh and try out some new techniques and expand my abilities. I don't usually do people so this was a ncie change of pace. As you can see from the pictures you now have a bust of the Dragonball Z hero, Goku! You should be

The first of the poll picks is now available and as you can see from the picture you have Blissey ready to go! Both the Ornamental and Basic versions of this one are support free so it's about as easy as you can get it. Not much else to it so enjoy the rest of your day!

Just in time for the weekend is this awesome Samus Nintendo Switch Dock! I love Pokemon but I think this might be my new favourite. You will need some supports under the shoulder pads and under the top part of the visor but other than that it's pretty smooth sailing and as you can see from my test,

With plenty of time before Valentine's Day for all of you that want to sell some prints you now have this easy to print Steamboat Willie and Minnie file ready for you. You can do this one without any supports and there is a painted file for both the Prusa and Bambu MMU printers.  Not much else

We have the first release of the month, the viral Saxophone Squirtle! Minimal supports will be needed under the front of the sax but other than that you should be fine. There is also a painted Bambu file for those that want the coloured version. Have fun!