Place any object atop these columns to turn it into an instant masterpiece! This wobbly set includes warped and twisted versions that combine classical architecture and glitch art into one cool mindbending piece.

The columns are split into 3 parts for extra clean and easy printing, plus customizability. The base, column and top print without supports and screw together. The bottom has an internal container where you can add weight for extra stability or to hide something small.

You can test the straight version of the column for free here.

Printing Guidelines

Your general default print settings should work fine, with adjustments depending on the strength you need for your application. Settings I used:

0.16mm layer height, 3 shells, 5 top layers, 6 bottom layers, 15% Lightning infill.

The alignment of the top and bottom can vary from printing. If the friction alone isn't enough you can fix things in place using glue or spacers between the middle and top parts. The small version includes both 'aligned' and 'twisted' versions of the top, depending on whether you want the square platform of the top to match the bottom or be rotated 45 degrees for a totally twisted look.

The large column is ~282 mm tall, with the middle part being 208 mm tall. (Photographed large version was scaled to 125%). The small column is ~141 mm tall.

Photographed model was printed on the Qidi Plus4 3D Printer (Also on Amazon) using Panchroma Marble White PLA (Amazon) and 3DJAKE ecoPLA Tough Natural*

These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!.