Bird flexi

• 3 walls, 15% gyroid or 3D honeycomb infill, no supports

• I don't recommend going below 60% scale, the keychains are already sized to 60%

Editing 3MF

• Avoid using the slicer's fill tool when coloring eyes, and eye shines in the 3MF files, because they are split to parts. Instead, assign color to them from the object list to make the edges look cleaner. Do not split to objects. The rest of the parts can be painted using the fill tool and toggling the smart fill angle.

• The eye shine objects can be right clicked from the object list and deleted.

• Please note that 3MFs will load with a custom profile that I used to print these models. Double check your settings prior to printing.

Bird house and Swing

• 3 walls, 15% gyroid or 3D honeycomb infill, no supports

• two versions for the post: curved and straight

• The house and swing are 1:1 with the birds. They are quite large at 100% scale, I recommend printing the swing at 60% for 60% birds.

• 2 birds fit into 1 bird house

• You can make the roof be a tighter fit by scaling it down 1-2%, at 60% scale the roof should sit tightly on the base without falling off freely.

⭐As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision⭐ + + 📌This model is for PERSONAL USE ONLY, to sell prints of these designs you will need to SUBSCRIBE TO THE MERCHANT PLAN available on my profile page - Click here📌