I am so happy to drop this collaboration with ✨DreamHorn ✨ make sure to check them out and give them a follow their designs are magical!!!

🐦‍⬛ Crow Magnet slider 🐦‍⬛

• Check out this assembly clip with hidden magnets: Youtube shorts

• all parts can be printed with 2 walls, 15% gyroid or 3D honeycomb infill, no supports

• I recommend printing the beak, and eye parts with 0.12 Layer height

• Prints in parts and then glue together.

• 2 magnet options: hidden and glue in. Only use the hidden option if you have a magnetic print bed, using it on a none-magnetic bed can cause the magnets to stick to the nozzle and cause damage. The glue in version can be used with any type of bed.

• If you are using the hidden magnet option and want it to be silent, add a small bit of super glue into the holes before putting in the magnets.

• The magnets I used are 5x2. The holes can fit 5x3 magnets. I buy them from the Canada Amazon - Amazon.CA magnets

💀 Skull Dice tower 💀

• 2 walls, 15% gyroid or 3D honeycomb infill, no supports

• 100% dice tower fits larger resin crafted dice. 90% dice tower fits standard dice

• Skull and base print separately and can be glued together

⭐As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision⭐
 + + 📌This model is for PERSONAL USE ONLY, to sell prints of these designs you will need to SUBSCRIBE TO THE MERCHANT PLAN available from my profile page - Click here📌