🪲 Beetles 🪲

• 3 walls, 15% gyroid or 3D honeycomb infill, no supports

• Tested down to 80%

Editing 3MF

• Avoid using the slicer's fill tool when coloring eyes, and eye shines and shell accessories (hearts, stars) in the 3MF files, because they are split to parts. Instead, assign color to them from the object list to make the edges look cleaner. Do not split to objects. The rest of the parts can be painted using the fill tool and toggling the smart fill angle.

• The eye shine objects can be right clicked from the object list and deleted.

• Please note that 3MFs will load with a custom profile that I used to print these models. Double check your settings prior to printing.

✨ Beetle Box ✨

• 2-3 walls, 15% gyroid or 3D honeycomb infill, no supports

• tested down to 80%

• Please print the Tolerance test for the top of the box FIRST in single color before printing a full top. How tightly the box opens and closes is going to greatly depend on a few factors such as filament flow (varies between different filaments) and scale.

• From testing I have had to increase the top of the box by 0.5% as it was hard to open, but with another type of filament scaling up 0.5% made the top of the box too loose. Tolerance is not something I can control when it comes to things fitting properly, tolerance is unique to filament, flow, and machines. Make sure you run a tolerance test (only 4 grams) before printing the boxes especially if you are scaling down.

• You should only need to increase or decrease by 0.5% to get a proper fit if the tolerance test came back with unwanted results.

• 100% box fits 2 100% scale beetles plus accessories

⭐This design contains SMALL PARTS; I strongly advise that the printed models are not to be handled by children under 3 without proper supervision⭐ + + 📌This model is for PERSONAL USE ONLY, to sell prints of these designs you will need to SUBSCRIBE TO THE MERCHANT PLAN available on my profile page - Click here📌