👻Ghost Catch all dish 👻

• 3 walls, 15% gyroid or 3D honeycomb infill, support free

• tested down to 50% and up to 120%

• Don't rotate the model from the way it loads on the plate. It is important to have the inner incline to be facing the fans for extra cooling

• I've included glue in version, and a combined 3MF

Editing 3MF

• Avoid using the slicer's fill tool when coloring eyes, and cheeks in the combined 3MF file, because they are split to parts. Instead, assign color to them from the object list to make the edges look cleaner. Do not split to objects. 



• Please note that 3MFs will load with a custom profile that I used to print these models. Double check your settings prior to printing

⭐As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision⭐
 + + 📌This model is for PERSONAL USE ONLY, to sell prints of these designs you will need to SUBSCRIBE TO THE MERCHANT PLAN available on my profile page - Click here📌