Jaatinen3D8.7K followers

Glock Keychain — Functional Blaster Toy video thumbnail

Glock Keychain — Functional Blaster Toy 3d model

Glock Keychain — Functional Blaster Toy

Name: Glock Keychain — Functional Blaster Toy
Brand: Jaatinen3D
SKU: 1146675
Price: 4.5 USD
Availability: InStock
Rating: 5 (245 reviews)

315 downloads · 2 years ago · Stylish little Glock-inspired pistol blaster toy keychain with a slide you can pull to cock the bolt

Subscribe for access starting at $10 USD

Get access to this model and 37+ more

One-time purchase for $4.50 USD

This model is restricted by licensing terms.

View license.

Description

Stylish little Glock-inspired pistol blaster toy keychain with a slide you can pull to cock the bolt mechanism! Shoots 6mm plastic airsoft BBs!

Printing tips: All the parts are oriented in the correct printing orientation. If your printer is not good at bridging, use supports for the Frame and Slide. You can print the Slide either horizontally or vertically.

If you use Bambu Studio or OrcaSlicer, a handy print project file is included!

Assembly: You'll need superglue, a short (15-20mm) rubber band, small 5mm diameter spring 15-25mm long, and one M3 bolt at least 10mm long. See the included assembly video!

If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. Please check out my membership plans! ❤

Tags:

Community Makes (1)

Really enjoy this model. I found the mag doesn't stay in for me. I'll add a drop of glue on the inside of the magwell to make it tight or some tape. I also could not get the screw to stay in the primed position at first but figured out if it set the screw deep enough so the head is almost flush to the slide it pushed it back enough so that it works perfectly every time. I added some Pics to hopefully explain it better.
Also, I'm sure it can be done in the slicer but I'm new and didn't attempt to but I drilled a hole in the mag to fit 2 extra bbs as storage. Lol really a fun little toy to bother my friends with. 5 stars 🌟 for me. And will definitely look at the other models.

Community Makes (1)

Discussions

rodrigovargas9861 year ago

Really enjoy this model. I found the mag doesn't stay in for me. I'll add a drop of glue on the inside of the magwell to make it tight or some tape. I also could not get the screw to stay in the primed position at first but figured out if it set the screw deep enough so the head is almost flush to the slide it pushed it back enough so that it works perfectly every time. I added some Pics to hopefully explain it better. Also, I'm sure it can be done in the slicer but I'm new and didn't attempt to but I drilled a hole in the mag to fit 2 extra bbs as storage. Lol really a fun little toy to bother my friends with. 5 stars 🌟 for me. And will definitely look at the other models.

PrinterBambu Lab A1

MaterialPLA

entinnguyen6 months ago

thanks and i also appreciate the mac 10 really much!

entinnguyen6 months ago

Can you create a magazine that holds 2 bbs?

Jaatinen3D6 months ago

The Glock V2 has a magazine!

voucheyhelp1 year ago

VERY poor adhision plz fix

bryes562 years ago

what are the perimeters settings? I printed a few but when you cock the the gun back the screw doesn't seat in at all

Jaatinen3D2 years ago

Can you pull it all the way back? Try adding lubrication (silicone lubricant or some oil) to the firing pin, spring and barrel. The spring can sometimes get stuck to the firing pin and rotate it back to uncocked position.

GhostPrint2 years ago

Could you recommend a site to buy the hardware?

Jaatinen3D2 years ago

I always recommend local stores first if you have them, but if not, AliExpress is where I've ordered my springs and bolts from. Bambu Lab's Maker's Supply store also has the required components if you ever happen to order something from there.