Updated rimmed version, incorporating on all the feedback I received.

Compare to the previous design, you will find the following modifications:

1. Enclosed edges and raised outer walls to trap water in the grooves
2. Recessed cloud-shaped outlines halfway through, allowing condensation to collect without leaking
3. Added slots for rubber bumpers (6 x 2mm) on the back of the coasters
4. Added slots for rubber bumpers (6 x 2mm) on the bottom of the triangle stand

New addition:

This version also includes a new Harmony Stand, inspired by the Hall of Central Harmony at the Forbidden City. Ginkgo leaf accents are added on the sides to bring a subtle sense of calm.

Dimension

4 x rimmed cloud coasters | ~100mm diameter 1 x triangle stand | ~100mm wide 1 x harmony stand | ~100mm wide

Support

No supports needed

Printing Tips:

• Coasters - For a smooth, glossy top surface, enable ironing in your slicer.
• Stands - For a smooth finish, enable variable layer height.

Both settings are pre-configured in the .3mf file, based on my extensive testing.

Kindly note that ironing settings can be tricky, so you may need to fine tune them depending on your printer and filament of choice.

Filaments I used Bambu Lab PLA Basic Brown (10800) Bambu Lab PLA Basic Jade White (10100) Bambu Lab PLA Basic Gradient Arctic Whisper (10900) Bambu Lab PLA Matte Sky Blue (11603)

Happy printing! <3