2 brand new free Easter egg twist fidgets

Choose between the twisted egg or the colored egg… or both!

Fully print in place with no support required and no brim necessary with zero infill for little waste, both are suitable to fit on any FDM printer

Highly addicted and satisfying to fidget, it fits perfectly in all hands and is very simple to print

By request I made these 2 fun fidgets from the awesome original Easter egg storage pots from last Easter, now converted into these fun stress relieving fidgets

Super simple to print with zero infill, supports or brim with just Arachne walls recommended

Simply make sure your filament is calibrated and choose your fidget

Troubleshooting

For anyone who has difficulty loosening the joints please ensure your filament is dry and calibrated, ensure all supports are cleanly removed - each type of filament and brand can extrude at slightly different thickness which can lead to the joints sticking, this can be easily fixed however

If your print is stuck you should be able to easily free the joints with some pressure & if any still remain stuck please carefully insert a scrapper blade into the gaps and wiggle until the sections slide freely, this doesn't take long but can be avoided with finely tuned filament - please check the handy fix video below

https://www.youtube.com/shorts/fyvbujJthiM