2025 Christmas fidget - Flexi Snowman

Based on the popular fidget toy - Flexi Corn Cob by 3dnetic - Works in a similar fashion, he flexes, bounces & stretches with the 2025 Christmas theme

Print in place flexi body with no need for supports or brim or additional parts or glue, simply print the body & screw on the hat

Fits on any size FDM printer

Check it out in the quick video below

Once printed, the free the snowman and create the flexi simply bend and flex to free each joint, using your fingers or thin tool you can put pressure on the gaps & push and pull to loosen the joins creating the awesome flex, it's so simple

Important printing instructions

Do not enable supports, please ignore the warning, the design uses your fantastic printing capabilities to make the unique model flex & bounce freely without the need for supports to build

If using the provided 3MF files please adjust your filament flush volumes as per your choice of filament (I recommend 0 if unsure)

Printing using the stl files

Only supports are required for the hat on the build plate only, all other settings for the hat set to default is completely fine

Body stl print settings

Quality/ line width

All wall line widths set to 0.42

Quality/ advanced

Order of walls - inner wall/ outer wall/ inner wall

Only one wall on top surfaces - topmost surface

Only 1 wall on first layer - enabled

Strength/ walls

wall loops 6

Strength/ top/bottom shells

top surface pattern - concentric

top shell layers - 4

Bottom surface pattern - octagram

Bottom shell layers - 4

Strength/ sparse infill

Sparse infill pattern - gyroid

Speed / layers

Initial layer - 50

initial layer infill - 105

Outer wall - 50

Inner wall - 200

Sparse infill - 200

Internal solid infill - 200

Gap infill - 200

Speed/ acceleration

Travel - 8000

Others/ bed adhesion

Brim type - no brim

Others/ Prime tower

Enable - enabled

Infill gap - 100%

Filament Settings

Please enable z-hop (on by default in the 3MF file)

To enable please go to settings overrides in your filament settings and enter the following settings

Length - 1.8mm

Z-hop when retract - 0.2

Z-hop type - normal

Once both parts are printed simply removed the supports from the hat, create the flex on the body by freeing up the joints and simply screw the hat on top on the snowman - your new fidget is now ready for Christmas

Merry Christmas 2025