Meet a super cute mini spooky design — the Flexi Crow! 🩷

Support-free, Print-in-Place design!

You will get:

🐦‍⬛ 2 STL files 🐦‍⬛ 1 pre-painted 3MF file

🏮 4 STL files 🏮 1 pre-set 3MF file (for the Shade part) in Bambu Lab Studio

Here comes the Crow with flexi wings along with it's keychain version.

The set also includes a Lantern body, base, and a softening light shade part. The body part comes in a keychain version too. The Lantern was designed for a 1.36cm mini LED Ball.

For the Crow I’ve prepared pre-colored 3MF file in case you run into any issues with painting.

⚙️Printing⚙️

Support-free design, Print-in-Place.

The Crow scaling was tested down to 70%:

• 0.16 mm Layer Height

• infill 15%, Gyroid

• 2 wall loops

• Basic PLA

For the best results, I recommend a 0.16 mm layer height.

When using softer PLA (like PolyTerra), make sure not to scale the model down too much, as the smaller joint parts may break or deform more easily.

Customize it your way! You can move, scale, or remove parts like the pupils and eye glares. Just click on the Crow model in your Slicer Software, use Split Into Parts, then Alt-click the part you’d like to tweak.

The pre-set 3MF file for the Lantern is focused on the shade part, which should be printed with 1 wall, 0 top/bottom shell layers, and brims. You can also use Spiral Vase mode, though it may be tricky when printing multiple pieces.

I do not recommend scale the Lantern down too much. It fits a 1.36 cm LED Balloon Lights, so scale it accordingly to your LED balloon.

Get a Commercial License, Monthly Deals, Bonuses, and a Welcome Pack with Exclusives:

Patreon

Happy to see you and your prints on my Socials:

Instagram TikTok

😊 Happy Printing!