The Dragon Page Keeperis an illuminated dragon in a cape reading an open book, designed to sit right on top of an LED tea light [https://a.co/d/edgb6Xs] or an RGB puck light [https://a.co/d/dZVWg0A].

I also made a larger version for a plug-in LED puck light (There are many options of these types of lights out there. Just know the opening is 63mm) https://a.co/d/1CJ61HP

This model comes in two sizes:

• Small (38mm opening) – fits 1.4inch LED tea lights.

• Large (63mm opening) – scaled up with adjustments to fit brighter LED puck light.

I recommend printing in a single light or translucent filament to maximize the glow. For the larger version, I finished it with gold, silver, and black Rub ‘n Buff, and the results were stunning!

This model was heavily requested after the Pumpkin Page Keeper release, and I think this dragon version will be a perfect addition for book lovers and fantasy fans alike!

Print Settings

• Walls: 2

• Infill: 5% gyroid

• Supports: Strong Tree supports on (critical regions only)

• Layer Height: 0.20 mm

Filament Usage & Print Times (Bambu Lab A1 tested)

• Small Version (38mm LED slot)

• Single Color: ~111g | 8 hrs

• Multicolor (4 colors): ~393g | 29.5 hrs

• Can reduce to 3 colors if removing the white book page layer

• Best printed in batches to save time and filament

Large Version (63mm LED puck slot)

• Single Color: ~315g | 18.5 hrs

I did not color the large version because it would take several days and far too much filament

Let me know what you think!

Happy printing, Christian, @CraftyKid3D