It's a floppy gingerbread couple!

This model does require multi-color capabilities.

Printing Instructions: The 3mf files provided were created using PrusaSlicer and should already have the following settings configured.

Layer height: 0.2mm Wall loops: 3 Supports: None

Make sure you have your build plate nice and clean to avoid adhesion issues. Either clean it with an ammonia based cleaner like Windex or clean it with high quality dish soap and warm water. IPA also helps, but not guaranteed to work.

Thank you for your time and consideration on this matter.

Feel free to join my discord for additional support, questions, or suggestions!