Hinged Printy Panels for doors and more complex constructions.

Printy Panels Video

Options

• Print-in-place - A weaker option, but requires no hardware. Prints must be accurate with strong layer adhesion.
• Wire - Use 24-22 gauge (about 0.5 to 0.75mm) wire to attach hinges.

Printing

• If print-in-place hinges are fused, you may be able to loosen them up by carefully wiggling the panels back and forth.
• All parts can be printed without supports.
• Do NOT add a brim.
• Use large 0.3mm layer heights for quicker prints that are still strong.
• Use PETG, ABS, or strong formulations of PLA. Silk, woodfill, and matte PLAs are NOT recommended.

Can I sell copies of this?

Yes! This project was shared under the Creative Commons - Attribution license.

This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.

Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.

This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.

Recommended Attribution Text

"Printy Panels - Hinge Panels" (https://3dprinty.xyz/project/118) is designed by 3D Printy (https://3dprinty.xyz) and shared under a Creative Commons Attribution (CC BY 4.0) license (https://creativecommons.org/licenses/by/4.0/).