Gardening just got fun with this cute little carrot patch 🥕🥕 Plant it on your desk, coffee table or anywhere else that needs a little touch of spring.

Update 3/21/2025: I added four new files to this model: (1) Big Carrot with no stem, (2) Stem for Big Carrot, (3) Small Carrot with no stem, and (4) Stem for Small Carrot. These print separately and fit together snugly. (I had gotten feedback that the stem on the carrots could sometimes break off so this should fix that problem 💪)

I have included the following digital files: (1) Big Carrot (2) Small Carrot (3) Dirt Bed (4) Planter Box Update 8/30/2024 I've added two more files: (5) 2 Carrot dirt bed (6) 2 Carrot planter box

Dimensions of Big Carrot: collapsed 2 ½ in. x 1 ⅝ in. (expanded 5 ½ in x 1 ⅝ in.) Dimensions of Small Carrot: collapsed 2 ¼ in. x 1 ⅜ in. (expanded 4 ½ in. x 1 ⅜ in.) Dimensions of dirt bed: 7 in. x 2 ⅛ in. x 1 in. Dimensions of Planter box: 7 ¼ in. x 2 ½ in. x 1 ¼ in. Dimension of 2 Carrot dirt bed: 4 in. x 2 ½ in. x 1 ¼ in. Dimension of 2 Carrot planter box: 4 ¼ in. x 2 ½ in. x 1 ¼ in.

3D PRINTING SETTINGS Layer Height 0.2mm PLA works great 15% Infill No supports needed

Note: I recommend printing carrots on smooth print plate (can use glue stick/hair spray to help with first layer adhesion if necessary)

How to print a two color (orange & green) carrot when printing at 0.2mm layer height: For the Big Carrot: pause at layer height 33.6 (layer number 168) and change the filament For the Small Carrot: pause at layer height 31.0 (layer number 155) and change the filament

I have also attached two 3mf print files if you would prefer to use those.

“Assembly” is simple, when all the pieces are printed, simply place the dirt bed in the planter box and add the carrots 🥕🥕🥕🥕

Have fun printing!